Mitsubishi Tredia 4G37 Sedan (1986-1988) (1986–1988)

Welcome to your comprehensive resource for the iconic MITSUBISHI TREDIA Base. This vehicle wiki serves as your go-to guide, packed with essential information on maintenance, common issues, and upgrades to keep your treasured TREDIA running smoothly. From brakes to filters and suspension, explore our insights to ensure your vehicle remains in peak condition for every journey.

Parts for the Mitsubishi Tredia 4G37 Sedan (1986-1988)

• Oil Filter (10)
• Drive Belt Alternator (6)
• Spark Plug (6)
• Starter Motor (5)
• Steering Rack Boot Kit (5)
• Brake Shoe Rear (4)
• Fuel Filter (4)
• Coil Spring Front Standard Profile (4)
• Exhaust Flange Gasket Pipe (4)
• Air Filter (4)
• Radiator Cap (4)
• Temperature Sensor / Sender Coolant (3)
• Wheel Bearing Kit/Hub Rear (3)
• Timing Tensioner (3)
• Front Wiper Refills (3)
• Ball Joint Front (3)
• Timing Belt Camshaft (3)
• Wheel Bearing (3)
• Wheel Nut (3)
• Cv Joint (3)
• Valve Cover Bolt Seal/Washer (3)
• Wiper Blade Front (3)
• Oil Cap (3)
• Ignition Coil (3)
• Steering Rack End (3)
• Wheel Bearing Kit/Hub Front (3)
• Cv Joint Boot Kit Front Left Inner (2)
• Shocks / Strut Rear (2)
• Wheel Cylinder Rear (2)
• Master Cylinder Brake (2)
• Valve Cover Gasket (2)
• Oil Pressure Switch/Sender (2)
• Oil Seal Crank Shaft Front / Timing Front (2)
• Oil Seal Crank Shaft Rear / Rear Main Bearing (2)
• Cylinder Head Bolt (2)
• Oil Seal Camshaft (2)
• Oil Seal Camshaft End (2)
• Oil Seal Oil Pump (2)
• Piston Ring (2)
• Welch / Frost Plug (2)
• Cv Joint Boot Kit Front Right Inner (2)
• Cv Joint Boot Kit Front Left Outer (2)
• Cv Joint Boot Kit Front Right Outer (2)
• Thermostat (2)
• Brake Pads Front (1)
• Front Wiper Pack (1)
• Wheel Bearing Grease Front (1)
• Oil Seal Balance Shaft (1)
• Balance Shaft Tensioner (1)
• Manifold Gasket Exhaust (1)
• Thermostat Housing Gasket (1)
• Tie Rod End (1)
• Passenger Side Blade (1)
• Wiper Blade Rear (1)
• Wiper Refill Set Front (1)
• Oil Seal Hub Front Inner (1)
• Oil Seal Hub Rear Inner (1)
• Cylinder Head Gasket (1)
• Wheel Bearing Rear (1)
• Water Pump (1)

Known issues

While the MITSUBISHI TREDIA Base is generally reliable, potential issues can arise with age and mileage. These may include wear and tear on suspension components, brake system maintenance, and general engine upkeep. Regular servicing and preventative maintenance are essential for addressing these potential issues.

WOF tips

During a Warrant of Fitness (WoF) inspection, your MITSUBISHI TREDIA Base will undergo a thorough check of its safety features. Key areas of focus include the brakes, suspension, lights, and tires. Ensuring that these components are in good working order will help you pass your WoF inspection.

About the Mitsubishi Tredia 4G37 Sedan (1986-1988)

To keep your MITSUBISHI TREDIA Base performing at its best, regular maintenance is key. Essential components requiring attention include brake pads, rotors, and air filters—each needing replacement at various service intervals. For instance, brake system checks are vital; listen for unusual noises like squealing or grinding, indicating it’s time for a service. Regular oil changes and air filter replacements can greatly enhance engine performance and fuel efficiency.

One area of importance is the cooling system, which typically needs inspection around the 150,000 km mark. Ensure you check the water pump, thermostat, and radiator hoses to prevent overheating. [This naturally links to /shop/cooling] Moreover, pay attention to the suspension, which can affect ride quality; inspect shocks, struts, and bushings regularly to maintain stability and comfort. Should you encounter issues, our service packs are available for Front Brake Service and Rear Brake Service to help you address braking needs swiftly, ensuring your TREDIA remains safe and ready for the road.