CARFIX

Mitsubishi Outlander Plug-in Hybrid (2017–2021)

Welcome to your comprehensive guide for the Mitsubishi Outlander Plug-in Hybrid (PHEV). This resource aims to equip you with the knowledge needed to keep your vehicle running smoothly and efficiently. We'll cover important maintenance aspects, potential problem areas to watch out for, and key parts considerations for maintaining your Outlander PHEV.

Parts for the Mitsubishi Outlander Plug-in Hybrid

Known issues

Owners of the Mitsubishi Outlander PHEV should be aware of a few potential issues:
• Rear Brake Pad Wear: The regenerative braking system can sometimes lead to premature wear of the rear brake pads due to specific system management traits.
• HV Battery Degradation: Over time, the high-voltage battery can experience degradation, which may impact the vehicle's electric-only range.
• Electronic Glitches: Some owners have reported occasional electronic system glitches that may require software updates.

These issues are typically observed between 80,000 and 150,000 kilometers.

WOF tips

When taking your Outlander PHEV for a Warrant of Fitness (WOF) inspection, pay attention to these key areas:
• High Voltage Battery: Degradation of the high voltage battery performance could impact your car's road-worthiness.
• Charging Cables and Connectors: Ensure the charging cables and connectors are in good condition, free from damage or excessive wear.

About the Mitsubishi Outlander Plug-in Hybrid

The Mitsubishi Outlander PHEV in New Zealand

The Mitsubishi Outlander PHEV struck a chord with New Zealand drivers, providing a practical solution for urban commutes with the added benefit of a petrol engine for longer journeys. Government incentives further fueled its popularity, making it an appealing choice for those seeking an eco-conscious vehicle.

Maintaining Your Outlander PHEV

Regular maintenance is crucial for maximizing the lifespan and performance of your Outlander PHEV. Adhering to the recommended service intervals is highly advised. Keep an eye on fluids, filters, and other wear items.

Key fitment consideration areas include:
• Suspension System: SHOCKS / STRUT REAR, SUSPENSION BUSH REAR CONTROL ARM - UPPER are vital for ride comfort and handling.
• Steering: Ensuring the STEERING RACK END is in good condition contributes to responsive steering.
• Timing Components: A TIMING KIT is essential for engine synchronization and longevity.
• Braking: Regular inspection of DISC BRAKE ROTOR FRONT is vital for safety.
• Drivetrain: The DIFF MOUNTING should be inspected for wear or damage.
• Air Conditioning: The AIR CONDITIONING PRESSURE SWITCH ensures proper A/C function.
• Transmission: Using the correct AUTOMATIC TRANSMISSION FLUID is crucial for smooth operation and transmission health.
• Cooling System: Monitoring the TEMPERATURE SENSOR / SENDER COOLANT helps prevent overheating. Replacing the THERMOSTAT when necessary is also important.
• Engine Components: CYLINDER HEAD BOLT should be inspected during major engine work. OIL SEAL CRANK SHAFT FRONT / TIMING FRONT prevents leaks.
• Wheel Hardware: WHEEL NUT condition contributes to safe wheel mounting.
• Body: STRUT BOOT/HATCH/TAILGATE condition affects water-tightness and strut protection.
• Alternator: ALTERNATOR PULLEY integrity ensures proper charging.

Questions owners ask

What are some common problems I might encounter with a 2017-2021 Mitsubishi Outlander PHEV in New Zealand?
Some owners of the Mitsubishi Outlander PHEV have reported issues such as premature rear brake pad wear, potentially due to the regenerative braking system. High-voltage battery degradation can also occur over time, impacting electric-only range. Additionally, occasional electronic glitches have been reported. These issues are typically observed between 80,000 and 150,000 kilometers.
Where can I get a replacement STEERING RACK END for my 2017-2021 Mitsubishi Outlander in NZ?
CARFIX stocks 177 SKUs for the 2017-2021 Mitsubishi Outlander. You can find a STEERING RACK END, along with other steering and suspension components, on the CARFIX website or in-store.
What should I pay special attention to during a WOF inspection for my Mitsubishi Outlander PHEV?
During a WOF inspection for your Outlander PHEV, ensure the high voltage battery performance is adequate, as degradation could impact road-worthiness. Also, carefully inspect the charging cables and connectors for any damage or excessive wear.
How often should I replace the AUTOMATIC TRANSMISSION FLUID in my 2017-2021 Mitsubishi Outlander?
Refer to your owner's manual for the specific service interval for your Outlander's automatic transmission. Using the correct AUTOMATIC TRANSMISSION FLUID is crucial for smooth operation and transmission health.
What kind of maintenance should I do on the suspension of my 2017-2021 Mitsubishi Outlander?
Regularly inspect the SHOCKS / STRUT REAR and SUSPENSION BUSH REAR CONTROL ARM - UPPER for wear and tear. These components are vital for ride comfort and handling. Replacing them when necessary will ensure optimal performance.
How important is it to replace the TIMING KIT on my 2017-2021 Mitsubishi Outlander?
Replacing the TIMING KIT at the recommended interval is essential for engine synchronization and longevity. Neglecting this can lead to serious engine damage.
What should I do if my Mitsubishi Outlander PHEV's electric range is decreasing?
Decreasing electric range can be a sign of HV battery degradation. Have the battery's health assessed by a qualified technician. Also, ensure your charging habits are optimal to maximize battery life.