The MITSUBISHI OUTLANDER Base offers a practical and economical SUV option, especially popular with families in New Zealand. Understanding its maintenance requirements and potential issues can help you keep your OUTLANDER running smoothly for years to come. This wiki provides a comprehensive overview, covering everything from service intervals to common problem areas.
Owners of the MITSUBISHI OUTLANDER Base should be aware of a few potential trouble spots. Some models have experienced:
• CVT Transmission Issues: Be alert for unusual noises, slipping, or jerky shifting. Regular CVT fluid changes are crucial.
• Electronically Controlled 4WD System Malfunctions: If your model is equipped with 4WD, be mindful of any warning lights or unusual behavior when engaging or disengaging the system.
• Excessive Oil Consumption in Some Engines: Monitor your oil level regularly and address any significant oil consumption promptly.
These issues have been reported to surface between 120,000 and 180,000 kilometers.
When taking your MITSUBISHI OUTLANDER Base for a Warrant of Fitness (WOF) inspection, pay particular attention to:
• Rust around rear suspension mounts: This is a known weakness, so be sure to inspect this area thoroughly.
• Steering rack play: Excessive play in the steering rack can lead to a WOF failure.
Keeping Your OUTLANDER Base on the Road
This section details crucial maintenance areas and typical component lifecycles for your MITSUBISHI OUTLANDER Base.
Under the Bonnet:
• Air Filter: Regular air filter replacement is essential for engine performance and fuel efficiency. Check your filter periodically and replace it as needed.
• Radiator: Maintain your cooling system with regular checks of coolant levels and radiator condition. Look for signs of leaks or corrosion.
• Oil Seal (Crank Shaft Front / Timing Front): These seals ensure proper lubrication and prevent oil leaks. Inspect for any signs of leakage during servicing.
• Sensor (Crank Angle): A faulty crank angle sensor can cause starting or running issues. Be aware of potential symptoms such as rough idling or stalling.
• Timing Chain: The timing chain synchronizes the engine's valves and pistons. While designed for longevity, listen for any unusual noises from the engine that might indicate wear over time.
Drivetrain & Suspension:
• CV Joint Front Outer & CV Joint Boot Kit Front Left Outer: Regularly inspect the CV joint boots for any tears or damage. Replacing damaged boots promptly can prevent costly CV joint failures.
• Drive Shaft Front: Listen for unusual noises, such as clicking or clunking, particularly when turning, which could indicate drive shaft issues.
• Diff Mounting: Inspect the differential mountings for wear or damage, especially if experiencing excessive vibration.
• Suspension Bush Rear Beam Axle - Front & Bush Control Arm Rear Axle: Worn suspension bushes can affect handling and ride comfort. Look for signs of cracking or deterioration.
• Sway Bar Coupling Mount: Check the sway bar links and mountings for wear or damage, which can affect handling and stability.
• Strut Boot/Hatch/Tailgate: Inspect these to ensure proper support and smooth operation.
Braking & Wheels:
• Brake Pads Front: Regularly check brake pad thickness and replace them when they reach the minimum recommended thickness.
• Wheel Nut: Ensure wheel nuts are properly torqued to the manufacturer's specification after any wheel removal or tire change.