Mitsubishi Nimbus GDI (2000–2004)

Welcome to the MITSUBISHI NIMBUS GDI Vehicle Wiki, a resource designed to provide owners with valuable information for maintaining and understanding their vehicle. This guide covers common maintenance points, potential issues to be aware of, and details on various vehicle components. Whether you're a seasoned DIY enthusiast or simply want to be more informed about your NIMBUS GDI, this wiki offers helpful insights.

Parts for the Mitsubishi Nimbus GDI

• Sway Bar Link Front (6)
• Wiper Blade Front (4)
• Timing Tensioner (3)
• Ignition Coil (3)
• Camber Bolt Kit Front (3)
• Driver Side Blade (3)
• Passenger Side Blade (3)
• Tie Rod End (3)
• Clutch Slave Cylinder Kit (2)
• Suspension Bush Front Control Arm - Lower (2)
• Brake Caliper Piston Rear (2)
• Timing Belt Idler (2)
• Engine Mount Rubber Buffer (2)
• Sway Bar Link Rear (2)
• Advanced Clutch System (2)
• Cv Joint Front Outer (2)
• Suspension Bush Control/Trailing Arm (2)
• Valve Cover Gasket (1)
• Oxygen Sensor Pre-Catalytic Converter (1)
• Timing Kit (1)
• Engine Mount Front (1)
• Drive Belt Pulley Idler/Tensioner (1)
• Timing Belt Camshaft (1)
• Cylinder Head Gasket (1)
• Engine Mount Right (1)
• Cylinder Head (1)
• Timing Belt Balance Shaft (1)
• Universal Joint/Coupling Front & Rear (1)
• Water Pump (1)
• Starter Motor (1)
• Oxygen Sensor Post-Catalytic Converter (1)
• Wiper Blade Rear (1)
• Steering Rack End (1)
• Wheel Bearing Kit/Hub Front (1)
• Suspension Bush Front Sway Bar Mount (1)
• Suspension Bush Front Control Arm (1)
• Strut Mount Front (1)
• Strut Boot Kit Front (1)
• Suspension Bush Rear Control Arm (1)
• Brake Caliper Kit Front (1)
• Brake Hose Rear (1)
• Brake Hose Front (1)
• Brake Caliper Kit Rear (1)
• Switch Stop Light (1)
• Brake Pad Fitting Kit Rear (1)
• Brake Shoe Handbrake (1)
• Master Cylinder Kit Clutch (1)
• Engine Oil Pan Gasket (1)

Known issues

While specific common failure points are not indicated, regular maintenance is key to preventing issues. Pay close attention to the condition of rubber components such as suspension and steering bushings. Listen for unusual noises from the engine that may indicate timing belt or valve train issues. Consistent monitoring of fluid levels is essential.

WOF tips

During a Warrant of Fitness (WOF) inspection, the condition of the suspension bushes (front and rear control arm bushes, and control/trailing arm bushes), brake hoses, and steering components are carefully examined. Ensure these are in good working order to pass the WOF.

About the Mitsubishi Nimbus GDI

The MITSUBISHI NIMBUS GDI is a practical vehicle, and keeping it running smoothly involves regular maintenance and addressing potential issues as they arise. Several key areas contribute to the overall reliability and performance of your NIMBUS GDI:
• Engine Maintenance: Components like the timing belt idler and timing belt camshaft are crucial for maintaining proper engine timing. Consider a complete timing kit replacement at recommended intervals.
• Suspension System: The suspension system, including front and rear control arm bushes (both upper and lower), plays a significant role in ride comfort and handling. Inspect these bushes regularly for wear and tear, as well as the control/trailing arm bushes. Caster and camber are adjusted with camber bolt kits.
• Braking System: Regular inspection of brake hoses, including the rear brake hose, is vital for safe braking performance. Also, ensure that the stop light switch is functioning correctly.
• Clutch System: An advanced clutch system ensures smooth gear changes and efficient power transfer.
• Steering System: Pay attention to the steering rack end for smooth and accurate steering.
• Valve Train: The valve spring shim valve contributes to proper valve operation. Regular inspection of the camshaft may also be required.

Questions owners ask

What are the common WOF failure points for a MITSUBISHI NIMBUS 2000–2004 in New Zealand?

For your MITSUBISHI NIMBUS 2000–2004, WOF inspections will closely examine the condition of suspension bushes, specifically the front and rear control arm bushes, and control/trailing arm bushes. Brake hoses, including the rear brake hose, and steering components like the steering rack end are also critical areas to ensure they are in good working order for a WOF pass.

Where can I get replacement timing belt components for my MITSUBISHI NIMBUS 2000–2004 in NZ?

CARFIX stocks 78 SKUs for the MITSUBISHI NIMBUS 2000–2004. You can find essential engine maintenance parts like the timing belt idler and timing belt camshaft, or even a complete timing kit replacement, through CARFIX for your vehicle.

How often should I service my MITSUBISHI NIMBUS 2000–2004?

The recommended service interval for your MITSUBISHI NIMBUS 2000–2004 is every 10,000km. Regular maintenance at these intervals is crucial for preventing issues and ensuring the longevity of your vehicle.

What should I look out for regarding the suspension on my MITSUBISHI NIMBUS 2000–2004?

The suspension system on your MITSUBISHI NIMBUS 2000–2004, including front and rear control arm bushes (both upper and lower), and control/trailing arm bushes, significantly impacts ride comfort and handling. Regularly inspect these rubber components for wear and tear. If you notice uneven tyre wear or handling issues, you might need a camber bolt kit for caster and camber adjustments.

Are there any DIY guides available for maintaining my MITSUBISHI NIMBUS 2000–2004?

Yes, CARFIX offers 3 DIY video guides specifically for the MITSUBISHI NIMBUS 2000–2004. These can help you with various maintenance tasks, including those related to the braking system or general inspections.