Mitsubishi Lancer 4G91 Sedan (1991-1995) FWD Petrol 1.5L - Variant 2 (1991–1995)

The 1991-1995 Mitsubishi Lancer quickly became a beloved choice among New Zealand drivers, celebrated for its practicality, reliability, and spirited performance. As a versatile family car that could handle both daily commutes and weekend escapes, the Lancer’s base model offered great value while newer versions and GLXi models added desirable features. This legendary vehicle continues to be a favorite for those who appreciate a well-rounded, accessible automobile with a touch of rally-inspired excitement.

Parts for the Mitsubishi Lancer 4G91 Sedan (1991-1995) FWD Petrol 1.5L - Variant 2

• Radiator Coolant (12)
• Wiper Blade Front (10)
• Gear Oil Gearbox (10)
• Radiator Cap (9)
• Drive Shaft Front (8)
• Sway Bar Link Front (7)
• Oil Filter (7)
• Sway Bar Link Rear (6)
• Oxygen Sensor (6)
• Air Filter (5)
• Water Pump (5)
• Temperature Sensor / Sender Coolant (5)
• Suspension Bush Rear Control Arm (5)
• Fuel Filter (4)
• Suspension Bush Rear Control Arm - Lower (4)
• Suspension Bush Front Sway Bar Mount (4)
• Drive Belt (4)
• Brake Shoe Rear (4)
• Suspension Bush Rear Control Arm - Upper (4)
• Spark Plug (4)
• Steering Rack Boot Kit (4)
• Brake Fluid (4)
• Switch Stop Light (4)
• Thermostat (3)
• Camber Bolt Kit Front (3)
• Brake Hose Front (3)
• Disc Brake Rotor Rear (3)
• Brake Pads Rear (3)
• Disc Brake Rotor Front (3)
• Coil Spring Front Standard Profile (3)
• Cv Joint Boot Kit Front Left Outer (3)
• Coil Spring Rear Standard Profile (3)
• Oil Pressure Switch/Sender (3)
• Oil Seal Crank Shaft Front / Timing Front (3)
• Cv Joint Boot Kit Front Right Outer (3)
• Steel Washer Sway Bar Link Front (2)
• Oxygen Sensor Post-Catalytic Converter (2)
• Master Cylinder Brake (2)
• Ball Joint Front (2)
• Strut Mount Front (2)
• Suspension Bush Front Control Arm (2)
• Steering Rack End (2)
• Engine Oil (2)
• Control Arm Front (2)
• Control Arm Rear (2)
• Cv Joint Boot Kit Front Left Inner (2)
• Suspension Bush Sway Bar Link (2)
• Cv Joint Boot Kit Front Right Inner (2)
• Brake Pads Front (2)
• Oil Seal Camshaft (2)
• Shocks / Strut Front (2)
• Engine Mount (2)
• Oil Seal Camshaft End (2)
• Valve Cover Gasket (2)
• Timing Tensioner (2)
• Drive Belt Alternator (2)
• Camber/Caster Kit Front (2)
• Thermo Fan Switch (2)
• Suspension Bush Front Control Arm - Lower (2)
• Shocks / Strut Rear (2)

Known issues

Rust (especially in older examples), head gasket failures (on some engines), fragile basic interior trim.

WOF tips

Rust should always be a focal point, on suspension and strut towers, as well as the arches. The suspension system needs to be inspected thoroughly, and watch for any sign of engine leaks, particularly the head gasket.

About the Mitsubishi Lancer 4G91 Sedan (1991-1995) FWD Petrol 1.5L - Variant 2

The Mitsubishi Lancer remains a trustworthy companion on New Zealand's roads, evolving from its earlier models while keeping affordability and reliability at the forefront. However, it’s important to be proactive with maintenance, especially considering its common concerns. For instance, the cooling system typically needs attention around the 150,000 km mark. Key components such as the water pump, thermostat, and radiator hoses should be inspected regularly to prevent overheating. [Check out our range in the Cooling category for parts you might need!]

Additionally, owners should keep an eye on the car’s brakes due to wear and tear over time. Regularly inspecting the front and rear brake systems will ensure safety and performance—consider our Front Brake Service and Rear Brake Service packages that deliver comprehensive solutions. Head gasket failures can also be an issue on some engines; monitoring coolant levels closely can mitigate this risk. The interior trim may need some refreshing given its fragile nature, so be sure to explore our Car Care & Detailing products to keep your Lancer looking sharp. Taking these steps will not only extend the life of your Lancer but also keep it running smoothly for years to come.

Questions owners ask

What are the common issues to look out for with a 1991-1995 Mitsubishi Lancer in New Zealand?

Owners of the 1991-1995 Mitsubishi Lancer should be vigilant about rust, particularly in older examples, and on suspension and strut towers, as well as the arches. Head gasket failures can also be an issue on some engines, so monitoring coolant levels closely is important. Additionally, the basic interior trim can be fragile and may need refreshing over time.

When should I service the cooling system on my 1991-1995 Mitsubishi Lancer?

The cooling system on the 1991-1995 Mitsubishi Lancer typically needs attention around the 150,000 km mark. Key components such as the water pump, thermostat, and radiator hoses should be inspected regularly to prevent overheating.

What should I check for during a WOF inspection on my 1991-1995 Mitsubishi Lancer?

For a WOF inspection on your 1991-1995 Mitsubishi Lancer, rust should always be a focal point, especially on suspension and strut towers, as well as the arches. The suspension system needs to be inspected thoroughly, and watch for any signs of engine leaks, particularly from the head gasket.

Where can I get replacement cooling system parts for my 1991-1995 Mitsubishi Lancer in NZ?

CARFIX stocks a range of cooling system parts for your 1991-1995 Mitsubishi Lancer. You can find components like water pumps, thermostats, and radiator hoses in our Cooling category to help prevent overheating.

How often should I inspect the brakes on my 1991-1995 Mitsubishi Lancer?

Due to wear and tear over time, you should regularly inspect the front and rear brake systems on your 1991-1995 Mitsubishi Lancer to ensure safety and performance. CARFIX offers Front Brake Service and Rear Brake Service packages for comprehensive solutions.

What's the recommended service interval for a 1991-1995 Mitsubishi Lancer?

The recommended service interval for a 1991-1995 Mitsubishi Lancer is every 10,000 km.