Mitsubishi Lancer 4G18 Wagon (2003–2008)

Welcome to your go-to guide for keeping your Mitsubishi Lancer Base in peak condition. This resource highlights essential maintenance, common repair areas, and expert recommendations designed to keep your beloved vehicle running smoothly and efficiently for years to come.

Parts for the Mitsubishi Lancer 4G18 Wagon

• Suspension Bush Front Control Arm - Lower (10)
• Camber Bolt Kit Front (6)
• Control Arm Rear (6)
• Control Arm Front (5)
• Oxygen Sensor (5)
• Spark Plug (5)
• Steering Rack End (4)
• Engine Mount Rear (4)
• Engine Mount Left (4)
• Ignition Coil (4)
• Suspension Bush Rear Control Arm - Upper (3)
• Oil Filter (3)
• Oxygen Sensor Post-Catalytic Converter (3)
• Brake Pads Front (3)
• Strut Mount Front (3)
• Sway Bar Link Rear (3)
• Tie Rod End (2)
• Suspension Bush Rear Control Arm - Lower (2)
• Sway Bar Coupling Mount (2)
• Suspension Bush Sway Bar Link (2)
• Strut Mount Rear (2)
• Brake Pads Rear (2)
• Oxygen Sensor Pre-Catalytic Converter (2)
• Engine Mount Front (2)
• Engine Mount Rubber Buffer (2)
• Cv Joint (2)
• Air Filter (2)
• Wiper Blade Front (2)
• Brake Caliper Kit Front (1)
• Brake Hose Rear (1)
• Brake Hose Front (1)
• Brake Shoe Rear (1)
• Brake Caliper Piston Rear (1)
• Brake Caliper Kit Rear (1)
• Brake Pad Fitting Kit Front (1)
• Brake Pad Fitting Kit Rear (1)
• Brake Shoe Handbrake (1)
• Strut Boot Kit Front (1)
• Engine Oil Pan Gasket (1)
• Strut Boot/Hatch/Tailgate (1)
• Timing Tensioner (1)
• Shocks / Strut Front (1)
• Timing Kit (1)
• Shocks / Strut Rear (1)
• Timing Belt Camshaft (1)
• Cylinder Head Gasket (1)
• Engine Mount Right (1)
• Ball Joint Front Lower (1)
• Oil Cap (1)
• Engine Oil (1)
• Cv Joint Boot Kit Front Left Inner (1)
• Cv Joint Boot Kit Front Right Inner (1)
• Cv Joint Front Outer (1)
• Water Pump (1)
• Radiator Hose Lower (1)
• Suspension Bush Front Sway Bar Mount (1)
• Suspension Bush Shock Absorber (1)
• Steering Bush Steering Rack Mount Front (1)
• Suspension Bush Rear Beam Axle - Front (1)
• Suspension Bush Front Spring Axle Pivot (1)

Known issues

While the Mitsubishi Lancer Base is generally reliable, some owners have reported issues related to suspension wear, particularly concerning bushing deterioration. Regularly inspecting these components can help prevent further problems. Premature oxygen sensor failure can also occur; monitor engine performance for signs related to this.

WOF tips

When preparing your Mitsubishi Lancer Base for a Warrant of Fitness (WoF) inspection, pay close attention to the condition of your brakes, suspension components, and lights. Ensure all are functioning correctly and within acceptable limits. Also, verify the wiper blades provide adequate visibility.

About the Mitsubishi Lancer 4G18 Wagon

Maintaining your Mitsubishi Lancer Base is crucial to enjoy its spirited performance and longevity. Here are key areas you should focus on:
• Cooling System: To avoid overheating, inspect the water pump, thermostat, and radiator hoses around the 150,000 km mark. A proactive approach here can save you from expensive repairs down the line. [Explore parts in our /shop/cooling category.]
• Braking System: Regularly check and replace the front brake pads and inspect the rotors to ensure your stops are safe and secure. Routine maintenance is essential every 20,000 to 30,000 km, particularly for those avid drivers. [Find what you need in our /shop/braking category.]
• Filtration: Ensure optimal engine performance by routinely replacing your oil filters and air filters every 10,000 to 15,000 km. A clean engine is a happy engine! [Check out our /shop/filtration offerings.]
• Suspension System: Keep an eye on components like front lower ball joints and bushings; these become crucial as they age, affecting ride comfort and handling. Regular inspections are vital for maintaining the smooth driving experience you expect from your Lancer.

By staying ahead of common issues and adhering to service intervals, you can keep your Lancer Base running like new. If you encounter specific problems, like premature oxygen sensor failures or suspension wear, addressing these early can help prevent more significant issues. Consulting a qualified mechanic for complex repairs is always a wise choice, ensuring that you keep your ride in top shape.

Questions owners ask

What are some common problems I should watch out for on my 2003-2008 Mitsubishi Lancer?

Keep an eye on the suspension components, especially the bushings, as they are known to wear. Also, some owners have experienced premature oxygen sensor failure. Listen for any unusual engine performance issues that might indicate a problem.

How often should I replace the oil and air filters on my Mitsubishi Lancer?

For optimal engine performance, it's recommended to replace your oil and air filters every 10,000 to 15,000 km.

When should I inspect the cooling system on my Mitsubishi Lancer?

Inspect the water pump, thermostat, and radiator hoses around the 150,000 km mark to prevent overheating issues.

How often should I replace the front brake pads on my 2003-2008 Mitsubishi Lancer?

Routine brake maintenance, including checking and potentially replacing the front brake pads, is essential every 20,000 to 30,000 km, especially if you drive frequently.

What should I check on my Mitsubishi Lancer for its WOF?

For your Warrant of Fitness (WoF), make sure your brakes, suspension components, and lights are in good working order. Also, check that your wiper blades provide adequate visibility.

Where can I get front brake pads for my MITSUBISHI LANCER 2003–2008 in NZ?

CARFIX stocks 130 SKUs for the Mitsubishi Lancer 2003-2008. You can find front brake pads in our /shop/braking category.

What are the key suspension components I should inspect on my Mitsubishi Lancer?

Pay close attention to the front lower ball joints and bushings. Regular inspections are vital for maintaining a smooth ride.