Mitsubishi Lancer GL (1988–1992)

Welcome to your comprehensive resource for the Mitsubishi Lancer GL! In this guide, you'll discover essential insights into maintaining and cherishing your vehicle while ensuring it runs smoothly for years to come. Whether you're a longtime owner or new to the Lancer GL family, our expert tips focus on enhancing your driving experience and maximizing the longevity of your car.

Parts for the Mitsubishi Lancer GL

• Wiper Blade Front (15)
• Sway Bar Link Front (5)
• Oxygen Sensor (5)
• Suspension Bush Sway Bar Link (4)
• Camber Bolt Kit Front (3)
• Suspension Bush Front Control Arm - Lower (3)
• Brake Hose Front (3)
• Oil Filter (3)
• Wiper Blade Front & Rear (3)
• Air Filter (2)
• Spark Plug (2)
• Tie Rod End (2)
• Oxygen Sensor Post-Catalytic Converter (2)
• Timing Kit (2)
• Brake Hose (1)
• Valve Cover Gasket (1)
• Oxygen Sensor Pre-Catalytic Converter (1)
• Cv Joint Boot Kit Front Left Inner (1)
• Cv Joint Boot Kit Front Right Inner (1)
• Water Pump (1)
• Starter Motor (1)
• Alternator (1)
• Ignition Coil (1)
• Wiper Refill Set Front (1)
• Wiper Refill Front (1)
• Suspension Bush Front Sway Bar Mount (1)
• Control Arm Front (1)
• Suspension Bush Rear Control Arm (1)
• Strut Mount Rear (1)
• Steering Bush Steering Rack Mount Front (1)
• Suspension Bush Rear Beam Axle - Front (1)
• Suspension Bush Front Spring Axle Pivot (1)
• Brake Pads Front (1)
• Brake Hose Rear (1)
• Brake Shoe Rear (1)
• Brake Shoe Fitting Kit Rear (1)
• Brake Drum Rear (1)
• Wheel Cylinder Rear (1)

Known issues

Without specific technical bulletins available, it's crucial to be vigilant about general maintenance. Listen for unusual noises, pay attention to warning lights, and address any concerns promptly with a qualified mechanic.

WOF tips

During a Warrant of Fitness (WoF) inspection, ensure that all safety-related components are in good working order, including the braking system, suspension, steering, and lights. Pay particular attention to any worn or damaged components. Regular maintenance helps ensure your LANCER GL passes its WoF inspection.

About the Mitsubishi Lancer GL

Keeping your Mitsubishi Lancer GL in prime condition requires regular maintenance and timely replacements of key components. Be sure to carefully monitor these essential areas:
• Braking System: Regular checks of brake pads, rotors, and brake fluid are critical for safe driving. Consider scheduling a front brake service every 30,000 km and a complete rear brake overhaul as needed to maintain optimal performance. To get started, check out our Braking options.
• Suspension & Steering: With components such as suspension bushes and tie rod ends affecting your vehicle's handling, it’s important to inspect these parts occasionally. Watch for changes in ride comfort and pull to one side. This preventive approach can save you from costly repairs later.
• Engine & Drivetrain: To ensure reliability, replace your timing kit and monitor starter and alternator performance. Regularly changing your engine oil is essential for longevity—consider our Oil Service service every 5,000 to 10,000 km.
• Wiper System: Visibility is key for safe driving, especially in adverse weather. Replace your wiper blades promptly to ensure crystal-clear visibility. Don’t forget to check our Wipers for quality replacements.
• Cooling System: Pay attention to your cooling system, particularly around the 150,000 km mark. Inspect the water pump, thermostat, and radiator to prevent overheating issues. We’ve got all the necessary parts in our Cooling section to tackle these concerns.

Questions owners ask

How often should I get the brakes checked on my 1988-1992 Mitsubishi Lancer GL?

For your Mitsubishi Lancer GL, it's recommended to schedule a front brake service every 30,000 km. Regular checks of brake pads, rotors, and brake fluid are critical for safe driving, and a complete rear brake overhaul should be done as needed to maintain optimal performance.

What are the common issues that could cause my 1988-1992 Mitsubishi Lancer to fail a WOF in New Zealand?

To pass a Warrant of Fitness (WoF) inspection for your 1988-1992 Mitsubishi Lancer GL, pay close attention to the braking system, suspension, steering, and lights. Any worn or damaged components in these areas, such as worn brake pads or faulty suspension bushes, could lead to a WOF failure. Regular maintenance is key.

When should I replace the timing kit on my 1988-1992 Mitsubishi Lancer?

To ensure the reliability and longevity of your 1988-1992 Mitsubishi Lancer, it's important to replace your timing kit as part of regular maintenance. While a specific interval isn't provided, monitoring its performance and replacing it proactively will help prevent major engine issues.

Where can I get quality wiper blades for my 1988-1992 Mitsubishi Lancer in NZ?

You can find quality replacement wiper blades for your 1988-1992 Mitsubishi Lancer GL right here at CARFIX. We stock a range of wipers to ensure crystal-clear visibility, which is essential for safe driving in New Zealand's varied weather conditions.

What should I look out for with the cooling system on my 1988-1992 Mitsubishi Lancer?

For your 1988-1992 Mitsubishi Lancer GL, it's particularly important to pay attention to the cooling system around the 150,000 km mark. Inspect the water pump, thermostat, and radiator to prevent overheating issues. CARFIX has all the necessary parts in our Cooling section to address these concerns.

How often should I change the engine oil in my 1988-1992 Mitsubishi Lancer?

Regularly changing your engine oil is essential for the longevity of your 1988-1992 Mitsubishi Lancer GL. We recommend an oil service every 5,000 to 10,000 km to ensure optimal engine health.