Mitsubishi Lancer 4B10 (2009–2015)

The MITSUBISHI LANCER Base model stands out as a dependable and economical vehicle, particularly appealing to budget-conscious owners in New Zealand. By understanding its maintenance needs and common issues, you can significantly enhance its longevity and reliability, ensuring it continues to deliver excellent performance day in and day out.

Parts for the Mitsubishi Lancer 4B10

• Suspension Bush Front Control Arm - Lower (4)
• Oxygen Sensor (4)
• Oil Filter (3)
• Camber Bolt Kit Front (3)
• Sway Bar Link Front (3)
• Sway Bar Link Rear (3)
• Differential Mount Bush Front Of Rear (2)
• Control Arm Front (2)
• Suspension Bush Rear Control Arm - Upper (2)
• Control Arm Rear (1)
• Suspension Bush Rear Control Arm - Lower (1)
• Sway Bar Set (1)
• Suspension Bush Rear Control Arm (1)
• Suspension Bush Front Spring Axle Pivot (1)
• Cv Joint Boot Kit Front Left Inner (1)
• Cv Joint Boot Kit Front Right Inner (1)
• Radiator Hose Lower (1)
• Starter Motor (1)
• Alternator (1)
• Ignition Coil (1)
• Oxygen Sensor Post-Catalytic Converter (1)
• Suspension Bush Rear Sway Bar Mount (1)
• Suspension Bush Front Sway Bar Mount (1)
• Wiper Blade Front (1)

Known issues

Owners may encounter several common problems as their LANCER Base ages. Keep an eye out for:
• CVT Transmission Issues: Some models experience jerking or slipping in the CVT transmission, typically between 100,000 and 180,000 km.
• Rear Suspension Bush Wear: The rear suspension bushes are known to wear out, affecting handling and ride quality. Replacement may be necessary around the same mileage range.
• Timing Chain Issues: Certain LANCER Base models can develop timing chain problems, so listen for any unusual noises from the engine.

WOF tips

When preparing your MITSUBISHI LANCER Base for a Warrant of Fitness inspection, pay particular attention to these common 'watch points':
• Rust: Check carefully for rust around the windscreen and rear wheel arches, as these areas are prone to corrosion.
• Steering Play: Ensure there isn't excessive play in the steering components, as this can lead to a WOF failure.

About the Mitsubishi Lancer 4B10

<p>The CH Lancer has become a common sight on New Zealand roads due to its exceptional value and reliability. This vehicle's affordability has made it a favorite among both budget-savvy buyers and rental companies, providing the perfect balance between performance and cost.</p>

<p>Regular maintenance is vital to keeping your LANCER Base in excellent condition. Staying ahead of recommended service intervals and addressing potential issues proactively can prevent costly repairs down the line. Pay particular attention to commonly worn parts, such as <b>suspension bushes, control arms, alternators, and starter motors</b>. Components like these are essential for your car's handling and performance, and timely replacements can enhance your driving experience.</p>

<p>Listen for any unusual noises to catch early signs of <b>timing chain issues</b>, which can develop over time. Additionally, the <b>cooling system</b> requires inspection around 150,000 km; check the <b>water pump, thermostat, and radiator hoses</b>. Proper maintenance here is crucial to prevent overheating and engine damage. [This naturally links to /shop/cooling]</p>

<p>The <b>braking system</b> also deserves attention; ensure your brake pads, rotors, and lines are in good shape, especially if you notice reduced braking efficiency. [Explore our full range at /shop/braking] Inspect air and oil filters regularly as well, aligning with routine servicing to keep the engine running smoothly. [Find quality options at /shop/filtration]</p>

<p>By giving attention to these areas and maintaining regular service intervals, you can ensure that your LANCER Base continues to be a reliable partner on the road, helping you save on future repair costs and enhance safety and performance.</p>

Questions owners ask

What are the common WOF failure points for a MITSUBISHI LANCER 2009–2015 in New Zealand?

When preparing your MITSUBISHI LANCER 2009–2015 for a Warrant of Fitness (WOF) inspection, pay close attention to rust around the windscreen and rear wheel arches, as these areas are prone to corrosion. Additionally, ensure there isn't excessive play in the steering components, as this can lead to a WOF failure.

Where can I get replacement suspension bushes for my MITSUBISHI LANCER 2009–2015 in NZ?

CARFIX stocks 38 SKUs for the MITSUBISHI LANCER 2009–2015, including suspension bushes. You can find these and other essential parts like control arms, alternators, and starter motors on our website.

What are the common issues to look out for with the CVT transmission in a MITSUBISHI LANCER 2009–2015?

Some MITSUBISHI LANCER 2009–2015 models with CVT transmissions may experience jerking or slipping, typically between 100,000 and 180,000 km. If you notice these symptoms, it's recommended to have the transmission inspected.

When should I inspect the cooling system components on my MITSUBISHI LANCER 2009–2015?

The cooling system of your MITSUBISHI LANCER 2009–2015 requires inspection around 150,000 km. Specifically, check the water pump, thermostat, and radiator hoses to prevent overheating and engine damage. You can find cooling system components at CARFIX.

Are timing chain issues common in the MITSUBISHI LANCER 2009–2015?

Certain MITSUBISHI LANCER 2009–2015 models can develop timing chain problems. It's important to listen for any unusual noises from the engine, as this can be an early sign of a timing chain issue.

What maintenance is crucial for the braking system on my MITSUBISHI LANCER 2009–2015?

For your MITSUBISHI LANCER 2009–2015, ensure your brake pads, rotors, and lines are in good shape, especially if you notice reduced braking efficiency. Regular inspection and timely replacement of these components are vital for safety. CARFIX offers a full range of braking system parts.