Mitsubishi L200 6G72 Cab Chassis (1987–1996)

Welcome to your guide for the MITSUBISHI L200 Base. This workhorse is known for its reliability and practicality, making it a popular choice for both on and off-road adventures. This guide provides helpful information on maintaining your L200, focusing on standard fitment items and general upkeep.

Parts for the Mitsubishi L200 6G72 Cab Chassis

• Fuel Filter (23)
• Oil Filter (14)
• Brake Pads Front (7)
• Oxygen Sensor (5)
• Wiper Blade Front (5)
• Wiper Blade (4)
• Air Filter (4)
• Brake Shoe Rear (3)
• Wheel Nut (3)
• Brake Hose Front (2)
• Shocks / Strut Front (2)
• Cv Joint (2)
• Oil Seal Crank Shaft Front / Timing Front (2)
• Brake Hose (2)
• Water Pump (2)
• Steering Damper (2)
• Oxygen Sensor Post-Catalytic Converter (2)
• Engine Oil (2)
• Wiper Blade Front & Rear (2)
• Ignition Coil (1)
• Wiper Refill (1)
• Wheel Bearing Kit/Hub Rear (1)
• Wheel Bearing Grease Front (1)
• Bump Stop Front (1)
• Ball Joint Front Upper (1)
• Suspension Bush Front Spring Axle Pivot (1)
• Brake Hose Rear (1)
• Spark Plug (1)
• Valve Cover Gasket (1)
• Timing Tensioner (1)
• Oxygen Sensor Pre-Catalytic Converter (1)
• Timing Belt Camshaft (1)
• Manifold Gasket Exhaust (1)
• Manifold Gasket Inlet (1)
• Oil Seal Camshaft (1)
• Oil Seal Camshaft End (1)
• Cv Joint Boot Kit Front Left Inner (1)
• Cv Joint Boot Kit Front Right Inner (1)
• Starter Motor (1)

Known issues

While the MITSUBISHI L200 Base is generally reliable, owners should be aware of potential issues. These can include wear and tear on suspension components due to heavy use or off-road driving, and the importance of regular oil changes to prevent engine issues. Regularly checking fluid levels and addressing any unusual noises or vibrations promptly can help prevent more significant problems down the line.

WOF tips

When preparing your MITSUBISHI L200 Base for its Warrant of Fitness (WoF), pay close attention to the condition of your tires, brakes, and lights. Ensure all lights are functioning correctly and that tires have adequate tread depth. A thorough check of these essential safety components can help ensure a smooth WoF inspection.

About the Mitsubishi L200 6G72 Cab Chassis

Owning an L200 Base means prioritizing practicality and dependability. Keeping on top of routine maintenance is essential to ensuring its longevity and reliability.

Braking System:
Maintaining a healthy braking system is paramount for safety. Regular inspection of brake pads, rotors, and brake fluid is recommended. Listen for any unusual noises like squealing or grinding, which could indicate worn brake pads. A spongy brake pedal may indicate air in the brake lines or a need for a brake fluid flush.

Filters:
Regular filter replacements are crucial for optimal engine performance and longevity. This includes the air filter (to keep dirt and debris out of the engine), the oil filter (to remove contaminants from the engine oil), and the fuel filter (to ensure clean fuel reaches the engine). Check your owner's manual for recommended replacement intervals.

Suspension:
The L200's suspension is designed for both on and off-road use. Regular inspection of shocks, struts, and suspension components is vital, especially if you frequently drive on rough terrain. Signs of worn suspension components include excessive bouncing, poor handling, and uneven tire wear. Consider having your suspension inspected regularly, especially when your vehicle reaches higher mileage.

Regular servicing and attentive care will help ensure your MITSUBISHI L200 Base remains a reliable partner for years to come.

Questions owners ask

What are the most important things to check on my MITSUBISHI L200 1987–1996 to pass its WOF in New Zealand?

For your MITSUBISHI L200 1987–1996 to pass its Warrant of Fitness (WoF) in NZ, you should pay close attention to the condition of your tires, ensuring they have adequate tread depth. Thoroughly check your braking system, including pads and rotors, and confirm all lights are functioning correctly. These are essential safety components that will be scrutinised during the inspection.

How often should I replace the filters on my MITSUBISHI L200 1987–1996?

Regular filter replacements are crucial for optimal engine performance and longevity in your MITSUBISHI L200 1987–1996. This includes the air filter, oil filter, and fuel filter. While specific intervals can vary, checking your owner's manual for recommended replacement intervals is always best. However, given the 10,000km service interval, it's a good practice to inspect and replace these filters at least every 10,000km.

Where can I get brake pads for my MITSUBISHI L200 1987–1996 in NZ?

CARFIX stocks 113 SKUs for the MITSUBISHI L200 1987–1996, including brake pads. You can find front and rear brake pads, along with other braking system components like rotors, through CARFIX for your vehicle.

What are common signs of worn suspension components on my MITSUBISHI L200 1987–1996?

Given the L200's design for both on and off-road use, it's important to monitor its suspension. Signs of worn suspension components on your MITSUBISHI L200 1987–1996 include excessive bouncing, poor handling, and uneven tire wear. If you frequently drive on rough terrain or your vehicle has higher mileage, regular inspection of shocks, struts, and other suspension components is vital.

What should I listen for regarding the braking system on my MITSUBISHI L200 1987–1996?

When maintaining the braking system on your MITSUBISHI L200 1987–1996, listen for any unusual noises like squealing or grinding. These sounds often indicate worn brake pads that need replacement. Additionally, a spongy brake pedal could suggest air in the brake lines or a need for a brake fluid flush.