Mitsubishi Eterna 4G93 Sedan (1994-1996) (1994–1996)

Welcome to the CARFIX Vehicle Wiki for the MITSUBISHI ETERNA Base. This resource provides valuable information regarding maintenance considerations, potential issues, and WOF requirements to help you keep your ETERNA Base running smoothly.

Parts for the Mitsubishi Eterna 4G93 Sedan (1994-1996)

• Fuel Filter (8)
• Spark Plug (7)
• Coil Spring Front Standard Profile (7)
• Oil Filter (6)
• Disc Brake Rotor Front (6)
• Brake Pads Front (5)
• Wiper Blade Front (5)
• Steering Rack Boot Kit (4)
• Water Pump (4)
• Wiper Blade (4)
• Temperature Sensor / Sender Coolant (4)
• Air Filter (4)
• Valve Cover Gasket (4)
• Oil Seal Crank Shaft Front / Timing Front (3)
• Brake Pads Rear (3)
• Wheel Nut (3)
• Timing Tensioner (3)
• Oil Pressure Switch/Sender (3)
• Radiator Cap (3)
• Ignition Lead Set (3)
• Engine Oil (3)
• Front Wiper Refills (3)
• Control Arm (3)
• Oil Seal Crank Shaft Rear / Rear Main Bearing (2)
• Engine Oil Pan Gasket (2)
• Clutch Slave Cylinder Kit (2)
• Drive Shaft Front (2)
• Cv Joint Boot Kit Front Right Outer (2)
• Drive Belt Pulley Idler/Tensioner (2)
• Shocks / Strut Rear (2)
• Cv Joint Boot Kit Front Left Outer (2)
• Control Arm Front (2)
• Engine Mount Rear (2)
• Wheel Bearing Kit/Hub Front (2)
• Oil Seal Camshaft End (2)
• Wiper Blade Front & Rear (2)
• Cv Joint (2)
• Clutch Slave Cylinder (2)
• Radiator (2)
• Engine Mount Front (2)
• Oil Seal Camshaft (2)
• Starter Motor (2)
• Wiper Blade Rear (1)
• Wiper Refill (1)
• Wiper Refill Set Front (1)
• Tie Rod End (1)
• Wiper Refill Front (1)
• Steering Rack End (1)
• Shocks / Strut Front (1)
• Wheel Bearing Kit/Hub Rear (1)
• Wheel Bearing Grease Front (1)
• Bump Stop Front (1)
• Sway Bar Link (1)
• Steering Idler Arm (1)
• Bump Stop Rear (1)
• Radius / Strut Arm Set Lower (1)
• Disc Brake Rotor Rear (1)
• Brake Caliper Kit Front (1)
• Brake Shoe Rear (1)
• Switch Stop Light (1)

Known issues

While the MITSUBISHI ETERNA Base is generally reliable, like all vehicles, it's susceptible to wear and tear over time. Listen for unusual noises, pay attention to any warning lights, and address any issues promptly to prevent further damage. Regular servicing can help identify and resolve potential problems early on.

WOF tips

When preparing your MITSUBISHI ETERNA Base for a Warrant of Fitness (WOF) inspection, ensure that the brakes, lights, suspension, and tyres are in good working order. Pay particular attention to:
• Brake performance and condition.
• Tyre tread depth and overall condition.
• Proper functioning of all lights.
• Suspension components for excessive play or damage.

About the Mitsubishi Eterna 4G93 Sedan (1994-1996)

{"Maintaining Your MITSUBISHI ETERNA Base":"Keeping your MITSUBISHI ETERNA Base in optimal condition involves regular maintenance. Pay close attention to the condition of your brakes, filters, and suspension, ensuring they are functioning correctly. These components are crucial for safety and vehicle performance. Standard New Zealand fitment parts are generally suitable for these systems.","Braking System":"The braking system is paramount for safe driving. Regularly check brake pads, rotors, and brake fluid levels. Listen for any unusual noises, such as squealing or grinding, that could indicate wear or damage.","Filters":"Regular filter replacements are essential for engine health and passenger comfort. Consider the engine oil filter, air filter, and cabin filter. Clean filters contribute to efficient engine operation and improved air quality inside the vehicle.","Suspension System":"The suspension system plays a vital role in ride comfort and handling. Inspect shocks, struts, and springs for signs of wear or damage. A well-maintained suspension system ensures a smooth and controlled driving experience."}

Questions owners ask

What are the key maintenance areas for my MITSUBISHI ETERNA Base to keep it running well in New Zealand?

To keep your MITSUBISHI ETERNA Base in optimal condition, focus on regular maintenance of your brakes, filters, and suspension. These components are crucial for safety and performance, and standard New Zealand fitment parts are generally suitable for these systems.

What should I check on my MITSUBISHI ETERNA Base before a WOF inspection in NZ?

For your MITSUBISHI ETERNA Base's Warrant of Fitness (WOF) inspection, pay close attention to brake performance and condition, tyre tread depth and overall condition, proper functioning of all lights, and suspension components for excessive play or damage. Ensuring these are in good working order is key.

How often should I replace the filters in my MITSUBISHI ETERNA Base?

Regular filter replacements are essential for your MITSUBISHI ETERNA Base's engine health and passenger comfort. Consider replacing the engine oil filter, air filter, and cabin filter as part of your routine maintenance to ensure efficient engine operation and improved air quality.

Where can I get brake pads for my MITSUBISHI ETERNA 1994–1996 in NZ?

CARFIX stocks 194 SKUs for the MITSUBISHI ETERNA 1994–1996, including brake pads. You can find suitable brake pads for your vehicle through CARFIX.

What are common signs of wear in the suspension system of a MITSUBISHI ETERNA Base?

For your MITSUBISHI ETERNA Base, inspect shocks, struts, and springs for signs of wear or damage. A well-maintained suspension system is vital for ride comfort and handling, so addressing any issues promptly will ensure a smooth and controlled driving experience.

What should I listen for regarding the braking system on my MITSUBISHI ETERNA Base?

For your MITSUBISHI ETERNA Base's braking system, listen for any unusual noises such as squealing or grinding. These sounds can indicate wear or damage to components like brake pads and rotors, which should be checked regularly along with brake fluid levels.