Mitsubishi Eterna 4G32 Sedan (1980-1984) (1980–1984)

Welcome to your MITSUBISHI ETERNA Base vehicle wiki. This resource offers guidance on maintaining your vehicle's key systems for optimal performance in New Zealand conditions.

Parts for the Mitsubishi Eterna 4G32 Sedan (1980-1984)

• Radiator Cap (9)
• Oil Filter (5)
• Front Wiper Refills (3)
• Wiper Blade Front (3)
• Thermostat (2)
• Drive Belt Alternator (2)
• Wiper Blade (2)
• Shocks / Strut Rear (2)
• Oil Pressure Switch/Sender (2)
• Control Arm Front (2)
• Tie Rod End (2)
• Fuel Filter (2)
• Ball Joint Front (2)
• Pitman Arm (2)
• Oil Cap (1)
• Front Wiper Pack (1)
• Wiper Blade Front & Rear (1)
• Passenger Side Blade (1)
• Wiper Blade Rear (1)
• Wiper Refill Set Front (1)
• Wiper Refill Front (1)
• Brake Pads Front (1)
• Disc Brake Rotor Front (1)
• Brake Hose Rear (1)
• Switch Stop Light (1)
• Timing Tensioner (1)
• Thermostat Housing Gasket (1)
• Balance Shaft Tensioner (1)
• Bearing Clutch Spigot (1)
• Temperature Sensor / Sender Coolant (1)
• Thermo Fan Switch (1)
• Starter Motor (1)
• Alternator (1)
• Engine Oil (1)

Known issues

While generally reliable, keeping an eye on standard wear and tear items like brakes, filters and suspension will ensure the safety and reliability of your ETERNA.

WOF tips

Ensure all braking, suspension, and lighting systems are fully functional for WOF compliance. Check tyres for adequate tread depth and damage. Address any visible signs of deterioration in these areas promptly to pass inspection. Confirm that all filters have been replaced as needed to ensure the vehicle is meeting the emissions standards.

About the Mitsubishi Eterna 4G32 Sedan (1980-1984)

{"Maintenance Essentials":"Maintaining your MITSUBISHI ETERNA Base involves regular attention to several key areas. Monitoring your brakes, filters, and suspension components is crucial for both safety and longevity. Consider the impact of New Zealand roads and driving conditions on these parts.","Braking System":"Regular brake inspections are vital. Listen for unusual noises such as squealing or grinding, which could indicate worn brake pads or other issues. Ensure your brake fluid is at the correct level and is replaced according to manufacturer recommendations. Proper brake function is paramount for safe driving.","Filters":"Your MITSUBISHI ETERNA Base relies on several filters to keep it running smoothly. The air filter prevents debris from entering the engine, while the oil filter removes contaminants from the engine oil. The fuel filter ensures clean fuel reaches the engine. Replacing these filters at recommended intervals can help prevent engine damage and maintain performance.","Suspension System":"The suspension system plays a critical role in ride comfort and handling. Pay attention to how your vehicle handles on uneven surfaces. Excessive bouncing or swaying could indicate worn shocks or struts. Inspect suspension components regularly for signs of wear or damage, especially ball joints, bushings, and springs. Considering the varied terrains found in New Zealand, keeping your suspension in good condition is important."}

Questions owners ask

What are the most important things to check to keep my MITSUBISHI ETERNA 1980–1984 running well in New Zealand?

For your MITSUBISHI ETERNA 1980–1984, focus on regular inspections of your braking system, all filters (air, oil, and fuel), and the suspension components. Given New Zealand's varied driving conditions, these areas are crucial for both safety and the longevity of your vehicle.

How often should I replace the filters in my MITSUBISHI ETERNA 1980–1984?

To maintain optimal performance and prevent engine damage in your MITSUBISHI ETERNA 1980–1984, it's important to replace the air, oil, and fuel filters at their recommended intervals. This ensures clean air, oil, and fuel reach your engine, contributing to its smooth operation.

What should I look out for regarding the suspension on my MITSUBISHI ETERNA 1980–1984, especially with New Zealand roads?

On your MITSUBISHI ETERNA 1980–1984, pay close attention to how the vehicle handles on uneven surfaces. Excessive bouncing or swaying can indicate worn shocks or struts. Regularly inspect ball joints, bushings, and springs for any signs of wear or damage, as a healthy suspension is vital for comfort and handling on New Zealand's diverse terrains.

Where can I get brake pads and other essential parts for my MITSUBISHI ETERNA 1980–1984 in NZ?

CARFIX stocks 50 SKUs for your MITSUBISHI ETERNA 1980–1984, including essential braking components. You can find a range of parts like brake pads and other maintenance essentials directly through CARFIX for your vehicle in New Zealand.

What specific checks does my MITSUBISHI ETERNA 1980–1984 need to pass a WOF in New Zealand?

For your MITSUBISHI ETERNA 1980–1984 to pass a WOF, ensure all braking, suspension, and lighting systems are fully functional. Check tyres for adequate tread depth and any damage. Address any visible deterioration in these areas promptly. Additionally, confirm that all filters have been replaced as needed to ensure the vehicle meets emissions standards.

What are common signs of brake issues on my MITSUBISHI ETERNA 1980–1984?

For your MITSUBISHI ETERNA 1980–1984, listen for unusual noises like squealing or grinding when braking, as these often indicate worn brake pads or other issues. Also, regularly check your brake fluid level and ensure it's replaced according to manufacturer recommendations to maintain proper brake function.