This guide provides essential information for owners of MITSUBISHI Base models in New Zealand. Covering maintenance schedules, potential problem areas, and Warrant of Fitness (WOF) considerations, this resource aims to help you keep your MITSUBISHI Base running smoothly and reliably for years to come.

Parts for the Mitsubishi 4G63 (?-2999) - Variant 1

• Oil Filter (14)
• Radiator Cap (4)
• Water Pump (4)
• Fuel Filter (4)
• Starter Motor (4)
• Suspension Bush Leaf Spring (4)
• Oil Cap (4)
• Timing Cover Gasket/Kit (4)
• Oil Seal Balance Shaft (3)
• Oil Pressure Switch/Sender (3)
• Suspension Bush Front Sway Bar Mount (3)
• Air Conditioning Compressor (3)
• Spark Plug (3)
• Shocks / Strut Front (3)
• Wheel Bearing Kit/Hub Front (3)
• Ignition Coil (3)
• Automatic Transmission Filter (3)
• Engine Oil (3)
• Oil Seal Transmission/Gearbox Output Rear Extension (2)
• Oil Seal Camshaft (2)
• Wiper Blade Front & Rear (2)
• Switch Stop Light (2)
• Air Filter (2)
• Oil Seal Transmission/Gearbox Front Input (2)
• Valve Cover Gasket (2)
• Oil Seal Oil Pump (2)
• Thermostat (2)
• Suspension Bush Control/Trailing Arm (2)
• Oil Seal Differential Pinion Rear (2)
• Steering Pump Seal Kit (2)
• Sump/Drain Plug (2)
• Bearing Clutch Spigot (2)
• Wiper Blade Front (2)
• Pedal Pad Clutch (1)
• Wheel Nut & Stud Rear (1)
• Oil Seal Axle/Drive Shaft Inner (1)
• Temperature Sensor / Sender Coolant (1)
• Air Conditioning Receiver Drier (1)
• Fan Clutch (1)
• Drive Belt Kit (1)
• Alternator (1)
• Automatic Transmission Fluid (1)
• Wiper Blade Rear (1)
• Windscreen Washer Pump Front (1)
• Cylinder Head Bolt (1)
• Wheel Bearing Kit/Hub Rear (1)
• Strut Boot Kit Front (1)
• Sway Bar Coupling Mount (1)
• Suspension Bush Shock Absorber (1)
• Suspension Bush Rear Leaf Spring - Shackle (1)
• Suspension Bush Front Shock Absorber - Upper (1)
• Steering Bush Steering Idler Front (1)
• Suspension Bush Rear Leaf Spring - Front Eye (1)
• Suspension Bush Rear Leaf Spring - Rear Eye (1)
• Suspension Bush Set Rear Shock Absorber - Upper And Lower (1)
• Shock Absorber Fitting Kit Front (1)
• Shock Absorber Fitting Kit Rear (1)
• Leaf Spring Shackle Rear (1)
• Steering Arm (1)
• Shackle Pin Front Leaf Spring - Rear (1)

Known issues

Owners should be aware of potential issues with the automatic transmission (specific models) and the possibility of oil leaks from the valve cover and distributor, typically occurring between 150,000km and 250,000km. Regular inspection can help catch these problems early.

WOF tips

When taking your MITSUBISHI Base for a Warrant of Fitness (WOF) inspection in New Zealand, pay close attention to:
• Rust, particularly around the rear wheel arches.
• The condition of suspension components, especially ball joints.

About the Mitsubishi 4G63 (?-2999) - Variant 1

These Mitsubishi models were popular choices for affordable and reliable family transportation in New Zealand, particularly throughout the 1980s and 1990s. Understanding the common maintenance needs and potential issues can help extend the life of your vehicle.

Maintenance & Service
Regular servicing is crucial for any vehicle. Following the recommended service schedule will contribute to its longevity and reliability. Key areas to address during servicing include:
• Brakes: Regular inspection and maintenance of the brake system are essential for safety.
• Filters: Replacing air, oil, and fuel filters as recommended ensures optimal engine performance.
• Suspension: Maintaining the suspension components ensures a comfortable ride and safe handling.

Potential Issues
Like many older vehicles, MITSUBISHI Base models can experience certain issues as they age. Be aware of the following:
• Automatic transmission issues may arise in specific transmission models as mileage increases.
• Oil leaks from the valve cover and distributor are also relatively common over time.

Questions owners ask

What are the most common issues to look out for with a MITSUBISHI 4G63 (?-2999) - Variant 1 –2999 in New Zealand?

Owners of the MITSUBISHI 4G63 (?-2999) - Variant 1 –2999 should be aware of potential issues with the automatic transmission, particularly as mileage increases. Oil leaks from the valve cover and distributor are also relatively common, typically occurring between 150,000km and 250,000km. Regular inspection can help catch these problems early.

What should I pay attention to for a WOF inspection on my MITSUBISHI 4G63 (?-2999) - Variant 1 –2999?

When taking your MITSUBISHI 4G63 (?-2999) - Variant 1 –2999 for a Warrant of Fitness (WOF) inspection in New Zealand, pay close attention to rust, especially around the rear wheel arches. The condition of suspension components, particularly ball joints, is also a common WOF concern for these models.

How often should I service my MITSUBISHI 4G63 (?-2999) - Variant 1 –2999?

The recommended service interval for your MITSUBISHI 4G63 (?-2999) - Variant 1 –2999 is every 10,000km. Adhering to this schedule is crucial for the longevity and reliability of your vehicle.

Where can I get replacement brake pads and filters for my MITSUBISHI 4G63 (?-2999) - Variant 1 –2999 in NZ?

CARFIX stocks 153 SKUs for the MITSUBISHI 4G63 (?-2999) - Variant 1 –2999, including essential maintenance items like brake pads, air filters, oil filters, and fuel filters. You can find these parts readily available through CARFIX in New Zealand.

Are oil leaks common on the MITSUBISHI 4G63 (?-2999) - Variant 1 –2999?

Yes, oil leaks from the valve cover and distributor are relatively common on the MITSUBISHI 4G63 (?-2999) - Variant 1 –2999, especially as the vehicle ages and accumulates mileage, typically between 150,000km and 250,000km.