Mitsubishi 3000 GT 6G72 (DOHC 24V) (1989–2000)

Welcome to your resource for maintaining your Mitsubishi 3000GT Base Model. This guide provides essential information on routine maintenance, potential issues to watch out for, and parts considerations to ensure your vehicle remains in top condition. Understanding your 3000GT's needs is key to its longevity and enjoyable performance.

Parts for the Mitsubishi 3000 GT 6G72 (DOHC 24V)

• Front Wiper Pack (29)
• Passenger Side Blade (17)
• Driver Side Blade (15)
• Rear Wiper Pack (13)
• Rear Single Blade (13)
• Oil Filter (7)
• Fuel Filter (4)
• Oxygen Sensor (4)
• Camber Bolt Kit Front (3)
• Sway Bar Link Front (3)
• Air Filter (3)
• Tie Rod End (2)
• Suspension Bush Front Sway Bar Mount (2)
• Suspension Bush Sway Bar Link (2)
• Oxygen Sensor Post-Catalytic Converter (1)
• Ignition Coil (1)
• Oxygen Sensor Pre-Catalytic Converter (1)
• Front Wiper Refills (1)
• Engine Oil Pan Gasket (1)
• Suspension Bush Rear Control Arm - Lower (1)
• Suspension Bush Front Control Arm (1)
• Steering Rack End (1)

Known issues

While generally a reliable vehicle with proactive maintenance, some owners have noted potential issues related to its age:
• Corrosion: Older vehicles may be prone to corrosion, particularly in areas exposed to road salt or moisture. Regular inspections and rust prevention measures can help mitigate this.
• Suspension Wear: Suspension components may wear over time, leading to a decline in ride quality and handling. Bushings, ball joints, and struts/shocks should be inspected and replaced as needed.
• Electrical Problems: As with many older vehicles, electrical issues may arise. Thorough diagnostics are essential to pinpoint and address any electrical problems.

WOF tips

Common WOF failures related to the 3000GT could include worn suspension components, faulty lighting, and brake system issues. Addressing these proactively will help ensure compliance.

About the Mitsubishi 3000 GT 6G72 (DOHC 24V)

The Mitsubishi 3000GT is known for its sporty performance and sleek styling. Keeping it running smoothly requires attention to detail and proactive maintenance.

Maintenance Essentials:
• Wiper Blades: Regular replacement of wiper blades is crucial for maintaining clear visibility. Consider replacing both front and rear blades for optimal performance. Refills can be a cost-effective alternative to replacing the entire blade.
• Air Filter: A clean air filter ensures optimal engine performance and fuel efficiency. Replacing this at regular intervals is a simple but effective maintenance task.
• Fuel Filter: The fuel filter protects the engine by preventing contaminants from reaching the fuel injectors. Replacement intervals may vary, consider the vehicle's usage conditions.
• Oil Filter: Regular oil filter changes are essential for maintaining engine health. Always use a high-quality oil filter that meets the specifications for your 3000GT.
• Engine Oil Pan Gasket: Check for leaks around the engine oil pan gasket and replace it if necessary to prevent oil loss.

Suspension & Steering
• Suspension Bushes: Inspect front and rear control arm suspension bushes for wear and tear. Replacing worn bushes can improve handling and ride quality. The rear lower control arm bushes are particularly important to inspect.
• Steering Rack End: Play in the steering or unusual noises may indicate wear in the steering rack end. Replacing worn rack ends can improve steering response and precision.
• Camber Adjustment: Optimize your wheel alignment by assessing your camber using a camber bolt kit on the front suspension. This ensures maximum tire life and handling performance.

Questions owners ask

What are the most important maintenance tasks for my MITSUBISHI 3000 GT;GTO 1989–2000 to keep it running well?

For your MITSUBISHI 3000 GT;GTO, essential maintenance includes regularly replacing wiper blades for clear visibility, changing the air filter for optimal engine performance, and ensuring the fuel filter is clean to protect your engine. Don't forget consistent oil and oil filter changes, and keep an eye on the engine oil pan gasket for any leaks.

Where can I get suspension bushes for my MITSUBISHI 3000 GT;GTO 1989–2000 in NZ?

CARFIX stocks 83 SKUs for your MITSUBISHI 3000 GT;GTO. You can find front and rear control arm suspension bushes, including the critical rear lower control arm bushes, at CARFIX to improve your vehicle's handling and ride quality.

What are common WOF failure points for the MITSUBISHI 3000 GT;GTO 1989–2000 in New Zealand?

Common WOF failures for the MITSUBISHI 3000 GT;GTO often relate to worn suspension components like bushes and ball joints, faulty lighting, and issues with the brake system. Proactive inspection and replacement of these parts will help ensure your vehicle passes its Warrant of Fitness.

How often should I change the oil and oil filter in my MITSUBISHI 3000 GT;GTO?

The recommended service interval for your MITSUBISHI 3000 GT;GTO is every 10,000km. This includes regular oil and oil filter changes, which are crucial for maintaining engine health. Always use a high-quality oil filter that meets the specifications for your vehicle.

My MITSUBISHI 3000 GT;GTO's steering feels loose. What could be the problem?

Play in the steering or unusual noises in your MITSUBISHI 3000 GT;GTO could indicate wear in the steering rack end. Replacing worn rack ends can significantly improve steering response and precision.

What are some common issues to look out for with an older MITSUBISHI 3000 GT;GTO?

As an older vehicle, your MITSUBISHI 3000 GT;GTO may be prone to corrosion, especially in areas exposed to moisture. Suspension components can also wear over time, affecting ride quality. Additionally, electrical problems may arise, requiring thorough diagnostics.