Mazda Titan T3500 (1984–1989)

Welcome to the CARFIX Vehicle Wiki for the MAZDA TITAN T3500. This resource provides valuable information to help you understand and maintain your vehicle. Focusing on standard New Zealand fitment, we offer helpful insights into common maintenance areas, potential issues, and WOF considerations.

Parts for the Mazda Titan T3500

• Radiator Cap (12)
• Oil Filter (8)
• Fuel Filter (4)
• Drive Belt Air Conditioner (3)
• Manifold Gasket Exhaust (3)
• Tie Rod End (2)
• Head Set/Valve Regrind Gasket Set (2)
• Air Filter (2)
• Suspension Bush Shock Absorber (2)
• Manifold Gasket Inlet (1)
• Cylinder Head Bolt (1)
• Cylinder Head (1)
• Full Gasket Set (1)
• Valve Cover Bolt Seal/Washer (1)
• Clutch Kit (1)
• Bearing Clutch Spigot (1)
• Clutch Pressure Plate (1)
• Water Pump (1)
• Thermostat (1)
• Water Pump Auxiliary (1)
• Oil Cap (1)
• Wiper Blade Front (1)
• Shocks / Strut Rear (1)
• Sway Bar Coupling Mount (1)
• Bush (1)
• King Pin Kit (1)
• Engine Oil Pan Gasket (1)
• Valve Cover Gasket (1)
• Oil Seal Crank Shaft Rear / Rear Main Bearing (1)
• Thermostat Housing Gasket (1)

Known issues

As a light truck, the TITAN T3500 can experience wear and tear related to heavy use. Regularly check the vehicle for signs of rust, especially in areas prone to moisture. Pay attention to the condition of the tyres and ensure they are properly inflated. Routine maintenance and addressing minor issues promptly can help prevent more significant problems down the road.

WOF tips

When preparing your MAZDA TITAN T3500 for a Warrant of Fitness (WOF) in New Zealand, focus on essential safety components. Ensure all lights are functioning correctly, the brakes are performing adequately, the tyres meet legal requirements, and the vehicle is structurally sound. Pay particular attention to the condition of the chassis and suspension components, as these are often inspected closely. Correct any identified faults before the WOF inspection to avoid delays and ensure a safe vehicle.

About the Mazda Titan T3500

The MAZDA TITAN T3500 is a versatile light truck often used for commercial purposes. A solid workhorse, understanding its key systems will help keep it running smoothly.

Braking System: Maintaining the TITAN T3500's braking system is crucial for safety. Regular inspections of brake pads, rotors, and fluid are recommended. Pay attention to any unusual noises or decreased braking performance, as these indicate potential issues requiring attention. Ensure you're familiar with the standard braking components for your NZ-spec model.

Filtration: Proper filtration is essential for the engine's longevity. Regularly replacing air, oil, and fuel filters ensures optimal performance and protects vital engine components. Clogged filters can lead to decreased fuel economy and potential engine damage. Check recommended replacement intervals for the T3500.

Suspension: A healthy suspension system provides a comfortable ride and stable handling. Inspect the shocks, struts, springs, and bushings for wear and tear. Listen for unusual noises, such as clunking or squeaking, when driving over bumps. Maintaining your suspension components will ensure safe load carrying and comfortable journeys.

Questions owners ask

What are the common WOF failure points for a MAZDA TITAN T3500 in New Zealand?

When getting your MAZDA TITAN T3500 ready for a WOF, pay close attention to the lights, brakes, and tyre condition. Also, the chassis and suspension components are closely inspected, so ensure they are in good condition to avoid failure.

Where can I get brake pads for my 1984-1989 MAZDA TITAN in New Zealand?

CARFIX stocks 65 SKUs for the MAZDA TITAN 1984-1989, including brake pads. Check our website or visit a store to find the correct BRAKE PADS FRONT or BRAKE PADS REAR for your specific model.

How often should I change the oil filter on my MAZDA TITAN to keep it running smoothly?

To ensure the longevity of your MAZDA TITAN's engine, replace the oil filter every 10,000km. Regular oil and filter changes are crucial for maintaining optimal engine performance.

What are the signs of suspension problems on a MAZDA TITAN T3500?

Signs of suspension issues on your TITAN T3500 include unusual noises like clunking or squeaking when driving over bumps, excessive bouncing, and uneven tyre wear. Inspect the SHOCKS / STRUT FRONT, springs, and bushings for wear and tear.

How important is filtration for my MAZDA TITAN T3500, and what filters should I check?

Proper filtration is extremely important for your MAZDA TITAN T3500. Regularly replace the AIR FILTER, OIL FILTER, and FUEL FILTER to ensure optimal engine performance and protect vital engine components. Follow the recommended replacement intervals to prevent decreased fuel economy and potential engine damage.

What should I look for when inspecting the braking system on my MAZDA TITAN T3500?

When inspecting the braking system of your MAZDA TITAN T3500, check the brake pads, DISC BRAKE ROTOR FRONT, and brake fluid levels. Listen for any unusual noises or decreased braking performance, as these indicate potential issues requiring attention. Regular inspections are crucial for safety.

Is rust a common problem on MAZDA TITAN T3500 trucks in New Zealand?

Yes, rust can be a problem, especially in areas prone to moisture. Regularly check your MAZDA TITAN T3500 for signs of rust, and address any issues promptly to prevent more significant problems down the road.