Mazda Familia B5 Sedan (1985-1989) FWD Petrol 1.5L (1985–1989)

Welcome to your CARFIX vehicle wiki for the MAZDA FAMILIA (Base Model). This guide provides information to help you understand and maintain your vehicle, covering common issues, WOF (Warrant of Fitness) considerations, and general maintenance advice. The information here is designed to help owners keep their Familia in good condition.

Parts for the Mazda Familia B5 Sedan (1985-1989) FWD Petrol 1.5L

• Oil Filter (8)
• Drive Belt Alternator (7)
• Fuel Filter (6)
• Automatic Transmission Filter (6)
• Wheel Bearing (6)
• Steering Rack Boot Kit (6)
• Cv Joint Boot Kit Front Left Inner (6)
• Cv Joint Boot Kit Front Right Inner (6)
• Ignition Lead Set (6)
• Steering Rack End (6)
• Ignition Coil (4)
• Oil Seal Crank Shaft Rear / Rear Main Bearing (4)
• Water Pump (4)
• Radiator Cap (4)
• Timing Kit (4)
• Conrod Bearing (4)
• Brake Pads Rear (4)
• Main Bearing Crank Shaft (3)
• Coil Spring Front Standard Profile (3)
• Wheel Nut (3)
• Cv Joint Boot Kit Front Left Outer (3)
• Cv Joint Boot Kit Front Right Outer (3)
• Valve Cover Gasket (3)
• Timing Tensioner (3)
• Temperature Sensor / Sender Coolant (3)
• Drive Belt (3)
• Oil Seal Crank Shaft Front / Timing Front (3)
• Wheel Bearing Kit/Hub Rear (3)
• Strut Boot/Hatch/Tailgate (3)
• Ignition Module (3)
• Ignition Lead (3)
• Air Filter (3)
• Engine Oil (3)
• Switch Stop Light (3)
• Shocks / Strut Rear (3)
• Wheel Bearing Kit/Hub Front (3)
• Brake Pads Front (2)
• Engine Mount Right (2)
• Manifold Gasket Exhaust (2)
• Lash Adjuster (2)
• Bearing Clutch Spigot (2)
• Seal Ring (2)
• Cv Joint (2)
• Thermostat (2)
• Engine Mount Cross Member Front (2)
• Spark Plug (2)
• Drive Belt Power Steering (2)
• Sump/Drain Plug (2)
• Oil Pressure Switch/Sender (2)
• Oil Cap (2)
• Brake Shoe Rear (2)
• Thermostat Housing Gasket (2)
• Head Set/Valve Regrind Gasket Set (2)
• Alternator (2)
• Cv Joint Boot Kit Front (2)
• Exhaust Flange Gasket Pipe (1)
• Ball Joint Front (1)
• Wheel Bearing Grease Front (1)
• Strut Boot Kit Front (1)
• Shocks / Strut (1)

Known issues

Owners of MAZDA FAMILIA vehicles should be aware of some common issues that may arise, particularly in older models:
• Rust: Rust is a common problem, especially in coastal areas. Pay close attention to areas like the rear wheel arches.
• Carburettor Issues: If your Familia is equipped with a carburettor, issues may arise over time. Regular cleaning and adjustment can help prevent problems.
• Rear Shock Absorber Mounts: The rear shock absorber mounts are known to be a potential weak point and should be inspected regularly.

These issues often become more apparent between 150,000 and 250,000 kilometers.

WOF tips

When taking your MAZDA FAMILIA for a WOF inspection, here are some key areas to pay attention to:
• Rust around Rear Wheel Arches: This is a common area of concern and a frequent WOF failure point.
• Headlight Condition: Check for yellowing or dimness, which can affect visibility and lead to a WOF failure.
• Suspension Bushes: Especially the front suspension bushes, need to be in good condition to pass inspection. Inspect these for wear and tear.

About the Mazda Familia B5 Sedan (1985-1989) FWD Petrol 1.5L

The 1985-1989 MAZDA FAMILIA was a popular and affordable choice in New Zealand, appreciated for its fuel efficiency and practicality. Many owners found it to be a reliable and economical daily driver.

Maintaining Your Familia: Routine maintenance is key to keeping your MAZDA FAMILIA running smoothly. This includes regular oil changes, filter replacements, and inspections of brakes and suspension components. Adhering to the recommended service intervals can help prevent larger problems down the road.

Standard Fitment Considerations: Brakes, filters, and suspension are considered standard NZ fitment items. Ensure you select components that are appropriate for the vehicle's specifications.

Questions owners ask

What are the most common WOF failure points for a MAZDA FAMILIA 1985–1989 in New Zealand?

For your MAZDA FAMILIA 1985–1989, common WOF failure points include rust, particularly around the rear wheel arches, yellowing or dim headlights, and worn front suspension bushes. These are crucial areas to inspect before your WOF.

Where can I get replacement brake pads and filters for my 1985-1989 MAZDA FAMILIA in NZ?

CARFIX stocks 241 SKUs for the MAZDA FAMILIA 1985–1989, including standard NZ fitment items like brake pads, oil filters, and air filters. You can find these on our website or at your local CARFIX store.

What are the typical maintenance issues I should be aware of with a MAZDA FAMILIA 1985–1989, especially if it's high mileage?

Owners of MAZDA FAMILIA 1985–1989 models, particularly those between 150,000 and 250,000 kilometers, should watch out for rust (especially on rear wheel arches), carburettor issues, and potential problems with the rear shock absorber mounts. Regular inspections can help catch these early.

How often should I service my MAZDA FAMILIA 1985–1989?

The recommended service interval for your MAZDA FAMILIA 1985–1989 is every 10,000km. Adhering to this schedule with regular oil changes, filter replacements, and brake/suspension inspections will help keep it running smoothly.

My MAZDA FAMILIA 1985–1989 has a carburettor. What should I know about maintaining it?

If your MAZDA FAMILIA 1985–1989 is carburettor-equipped, issues can arise over time. Regular cleaning and adjustment of the carburettor are important preventative measures to ensure smooth operation and avoid problems.

Are there any specific suspension components I should regularly check on my 1985-1989 MAZDA FAMILIA?

Yes, for your MAZDA FAMILIA 1985–1989, it's important to regularly inspect the rear shock absorber mounts, as these are known to be a potential weak point. Also, pay attention to the front suspension bushes, as their condition is crucial for WOF inspections.