Mazda CX-5 PY-VPTS (2018–present)

The MAZDA CX-5 Base is a popular choice for New Zealand families seeking a reliable and practical SUV. Known for its blend of style and functionality, the CX-5 provides a comfortable driving experience and efficient performance. This guide provides owners with the essential information needed to maintain and understand their vehicle.

Parts for the Mazda CX-5 PY-VPTS

• Engine Oil (24)
• Radiator Coolant (11)
• Automatic Transmission Fluid (10)
• Suspension Bush Rear Control Arm - Lower (6)
• Brake Fluid (6)
• Oil Filter (6)
• Drive Belt Tensioner Assembly (5)
• Cabin Filter (4)
• Air Filter (4)
• Strut Boot/Hatch/Tailgate (4)
• Sway Bar Link Rear (4)
• Sway Bar Link Front (4)
• Wiper Blade Front (3)
• Camber Bolt Kit Front (3)
• Suspension Bush Rear Control Arm - Upper (3)
• Suspension Bush Rear Sway Bar Mount (2)
• Suspension Bush Front Control Arm - Lower (2)
• Shocks / Strut Front (2)
• Suspension Bush Front Sway Bar Mount (2)
• Control Arm Front (2)
• Differential Mount Bush Rear (2)
• Disc Brake Rotor Front (2)
• Drive Belt Alternator (2)
• Air Conditioning Compressor (2)
• Air Conditioning Receiver Drier (2)
• Fuel Filter (2)
• Shocks / Strut Rear (1)
• Drive Belt (1)
• Wiper Blade Rear (1)
• Air Conditioning Tx Valve (1)
• Drive Belt Kit (1)
• Drive Belt Water Pump (1)
• Oxygen Sensor (1)
• Engine Oil Pan Gasket (1)
• Brake Pads Rear (1)
• Wiper Arm Rear (1)
• Strut Boot Kit Rear (1)
• Filter Service Kit (1)
• Tie Rod End (1)
• Wheel Bearing Kit/Hub Front (1)
• Radiator Hose Lower (1)
• Thermostat (1)
• Drive Shaft Front (1)

Known issues

CX-5 owners should be aware of some common problems. Premature wear of the front lower control arm bushes can occur, typically around 80,000 - 120,000 km. Some owners have also reported potential for infotainment screen delamination. Diesel models (if applicable) might experience DPF issues.

WOF tips

When taking your MAZDA CX-5 Base for a WOF inspection, pay close attention to a few key areas. Tyre wear, especially on the front tyres, is a common reason for failure. Brake pad wear should also be carefully monitored. Also, make sure that the i-Stop (idle stop) system is working.

About the Mazda CX-5 PY-VPTS

Maintaining your MAZDA CX-5 Base involves regular servicing and awareness of potential issues. Typical maintenance tasks include replacing the engine oil and filter regularly, maintaining the radiator coolant level, and inspecting hoses like the lower radiator hose for wear. Keeping an eye on components such as the front control arms and rear sway bar links can also help prevent bigger problems down the line.

Focus on Parts & Maintenance:
• Cooling System: Regular coolant flushes help maintain optimal engine temperature. Also, inspect radiator hoses for cracks or leaks.
• Air Conditioning: A malfunctioning TX valve will affect the whole air conditioning system's efficiency.
• Suspension: Regularly check the condition of sway bar links (rear) and control arms (front). Camber bolt kits for the front may be required if alignment issues arise.
• Transmission: Maintain your automatic transmission with regular fluid changes and filter replacements to ensure smooth shifting.
• Braking System: Inspect brake pads (rear) regularly for wear and replace them when necessary.
• Wipers: Replace worn wiper blades (front) for excellent visibility.
• Engine: Monitor the engine oil pan gasket for leaks.
• Driveshaft: Note any unusual noises or vibrations when cornering, particularly from the driveshaft (front).
• Filters: Routine replacement of the air filter is essential for optimal engine efficiency. Also, be aware of filter service kits to ensure that all essential filters are maintained as per manufacturer's standards.

For DIY enthusiasts, the MAZDA CX-5 Base offers a moderate level of accessibility for common maintenance tasks. However, more complex repairs may require the expertise of a qualified mechanic.

Questions owners ask

What are the common WOF failure points for a MAZDA CX-5 2018–2999 in New Zealand?

When preparing your MAZDA CX-5 2018–2999 for a WOF, pay close attention to tyre wear, especially on the front tyres, as this is a frequent reason for failure. Brake pad wear, particularly the rear brake pads, should also be carefully monitored. Additionally, ensure the i-Stop (idle stop) system is functioning correctly.

Where can I get replacement front lower control arms for my MAZDA CX-5 2018–2999 in NZ?

CARFIX stocks 150 SKUs for the MAZDA CX-5 2018–2999. You can find front control arms and other suspension components like rear sway bar links through CARFIX for your vehicle.

What are some common issues reported by owners of the MAZDA CX-5 2018–2999?

Owners of the MAZDA CX-5 2018–2999 have reported premature wear of the front lower control arm bushes, often occurring between 80,000 and 120,000 km. Some owners have also experienced infotainment screen delamination. If you have a diesel model, DPF issues might also be a concern.

How often should I change the engine oil and filter on my MAZDA CX-5 2018–2999?

The service interval for the MAZDA CX-5 2018–2999 is 10,000 km. Regular engine oil and filter changes are crucial for maintaining optimal engine health.

What should I look out for regarding the cooling system on my MAZDA CX-5 2018–2999?

For your MAZDA CX-5 2018–2999, it's important to perform regular coolant flushes to maintain optimal engine temperature. Also, frequently inspect radiator hoses, such as the lower radiator hose, for any signs of cracks or leaks.

Are there any specific suspension components I should regularly check on my MAZDA CX-5 2018–2999?

Yes, for your MAZDA CX-5 2018–2999, you should regularly check the condition of the rear sway bar links and the front control arms. If you notice alignment issues, camber bolt kits for the front may be required.