CARFIX

Mazda B-Series B2600 i (1990–1999)

The Mazda B2600, also known across markets as the B-Series, Bravo, or Proceed, is more than just a pickup truck — it's a testament to dependability. If you’re one of the proud owners of this robust vehicle, this guide will equip you with vital information and resources to ensure your B2600 continues to thrive through the years.

Parts for the Mazda B-Series B2600 i

Known issues

Common issues for the Mazda B2600 include rocker cover gasket leaks and rust in lower body panels. These typically become apparent around 150,000-250,000 km.

WOF tips

When taking your Mazda B2600 for a Warrant of Fitness (WOF) inspection, be mindful of these potential watch points:
• Excessive Play in Steering Components: Ensure the steering system is tight and responsive.
• Corrosion: Inspectors will carefully examine the chassis and other critical structural areas for signs of corrosion.

About the Mazda B-Series B2600 i

Owner Insights for the Mazda B2600

The B2600's legacy continues to resonate in New Zealand, where its durability has won the hearts of tradespeople, farmers, and adventure seekers alike. As an owner, you’ll want to pay attention to various components over time. Common maintenance items may include timing gear camshafts, valve spring shims, and spark plugs — typically due for inspection around every 15,000 kilometers.

It's also crucial to periodically check important elements like wheel nuts, exhaust valves, and the brakes. As you service your B2600, you might consider having gearbox input shafts, leaf spring load helper rears, throttle position sensors/switches, and radiator hoses replaced or repaired at regular intervals to keep it running smoothly.

Common Issues

Though this mighty truck is built to last, it’s not without its quirks. As your B2600 ages, be alert for the following common issues:
• Rocker Cover Gasket Leaks: It's a relatively common occurrence to see oil leaks here, but they're manageable.
• Rust: Pay special attention to the lower body panels and tray area, especially if exposed to harsher conditions.

To ensure the longevity of your B2600, it’s advisable to check the cooling system around the 150,000km mark. Inspect parts like the water pump, thermostat, and radiator hoses for wear and tear. Discover more about our Cooling products here.

Maintaining your Mazda B2600 is not just satisfying; it’s also a journey of discovering your vehicle intimately. With a little DIY spirit, you'll find that many repairs can be tackled at home, saving you money and deepening your bond with this dependable workhorse.

Questions owners ask

What are the common issues I should look out for with my 1990-1999 Mazda B-Series, Bravo, or Proceed in New Zealand?
Owners of the 1990-1999 Mazda B-Series, Bravo, or Proceed commonly report rocker cover gasket leaks, which are manageable. Rust is another frequent issue, particularly on lower body panels and the tray area, especially if the vehicle has been exposed to harsh conditions. These issues often become apparent around the 150,000-250,000 km mark.
What maintenance should I be doing on my Mazda B2600 to keep it running smoothly?
For your Mazda B2600, it's recommended to inspect timing gear camshafts, valve spring shims, and spark plugs around every 15,000 kilometers. Periodically check wheel nuts, exhaust valves, and the brakes. Consider replacing or repairing gearbox input shafts, leaf spring load helper rears, throttle position sensors/switches, and radiator hoses at regular intervals. The cooling system, including the water pump, thermostat, and radiator hoses, should be inspected around the 150,000km mark.
Where can I get radiator hoses for my 1990-1999 Mazda B-Series, Bravo, or Proceed in NZ?
CARFIX stocks 785 SKUs for the 1990-1999 Mazda B-Series, Bravo, or Proceed. You can find radiator hoses and other cooling system components on the CARFIX website, specifically in our Cooling products section, to ensure your vehicle's longevity.
What should I be aware of when taking my Mazda B2600 for a WOF inspection in New Zealand?
When taking your Mazda B2600 for a Warrant of Fitness (WOF) inspection, pay close attention to potential watch points such as excessive play in steering components. Inspectors will also carefully examine the chassis and other critical structural areas for signs of corrosion, especially on lower body panels and the tray area.
At what mileage should I check the cooling system on my Mazda B2600?
It's advisable to check the cooling system of your Mazda B2600 around the 150,000km mark. This inspection should include parts like the water pump, thermostat, and radiator hoses for any signs of wear and tear.