CARFIX

Mazda 2 FUJA (2003–2007)

The Mazda 2 (also known as the Demio in some markets) Base model is a popular choice for first car buyers and those seeking an economical and practical city runabout. This guide provides essential information to help you maintain your vehicle and address common issues.

Parts for the Mazda 2 FUJA

Known issues

Owners of Mazda 2 / Demio Base models should be aware of a few common problems:

<ul>
<li><b>Rust:</b> The rear wheel arches are prone to rust, so regular inspection and treatment will help prevent its spread.</li>
<li><b>Air Conditioning:</b> The air conditioning compressor can be susceptible to failure, potentially requiring replacement.</li>
<li><b>CV Joints:</b> CV joints may wear over time, typically between 120,000 and 180,000 kilometers, leading to clicking noises during turning.</li>
</ul>

The typical kilometer range these issues arise is between 120000-180000kms.

WOF tips

When taking your Mazda 2 / Demio Base for a Warrant of Fitness (WOF) inspection in New Zealand, be mindful of the following points:

<ul>
<li><b>Rear Suspension Bushes:</b> Inspectors often check the condition of the rear suspension bushes for wear or damage.</li>
<li><b>Brake Pads:</b> The brake pads will be inspected to ensure they meet the minimum thickness requirements.</li>
</ul>

About the Mazda 2 FUJA

<p>Maintaining your Mazda 2 / Demio Base involves regular checks and preventative maintenance. Key areas to consider include:</p>

<ul>
<li><b>Front Suspension:</b> The front suspension system benefits from attention to components like the front lower ball joints, front bump stops and strut boots.</li>
<li><b>Timing Belt:</b> Adhering to the recommended replacement schedule for the timing belt (associated with the camshaft) is critical to preventing engine damage.</li>
<li><b>Braking System:</b> Regular inspection and maintenance of the front disc brake rotors and rear brake drums will help ensure safe stopping performance.</li>
<li><b>Engine:</b> Address any potential oil leaks by paying attention to the engine oil pan gasket and replace the oxygen sensor to optimize engine efficiency. Front Wipers should be replaced when needed.</li>
<li><b>Rear Axle:</b> Keeping the rear wheel bearing and hub well-maintained is essential.</li>
<li><b>Steering: </b> Replace worn tie rod ends when needed.</li>
</ul>

<p>Various components require periodic replacement, such as front wiper blades, rear wiper blade and suspension bushes in the front control arm as well as strut boot replacement.</p>

Questions owners ask

What are some common rust spots I should watch out for on my 2003-2007 Mazda 2 / Demio in New Zealand?
The rear wheel arches are a known rust-prone area on the Mazda 2 / Demio (2003-2007). Regular inspection and rust treatment are recommended, especially given New Zealand's climate.
My Mazda 2 Demio (2003-2007) air conditioning isn't working. What could be the problem?
A common issue with the 2003-2007 Mazda 2 / Demio is air conditioning compressor failure. It might need replacing. Consider getting it checked by a mechanic.
I'm hearing a clicking noise when I turn in my Mazda 2 / Demio. What could it be?
Clicking noises during turning in your Mazda 2 / Demio (2003-2007) often indicate worn CV joints. This typically occurs between 120,000 and 180,000 kilometers. Replacement may be necessary.
What should I be aware of when taking my 2003-2007 Mazda 2 / Demio for a WOF in New Zealand?
When getting a Warrant of Fitness (WOF) for your Mazda 2 / Demio (2003-2007) in NZ, pay attention to the rear suspension bushes, as inspectors frequently check these for wear and damage. Also, ensure your brake pads meet the minimum thickness requirements.
How often should I replace the timing belt on my Mazda 2 / Demio (2003-2007)?
Adhering to the recommended replacement schedule for the timing belt (associated with the camshaft) is critical to preventing engine damage in your Mazda 2 / Demio (2003-2007).
Where can I get front lower ball joints for my MAZDA 2;DEMIO 2003–2007 in NZ?
CARFIX stocks 108 SKUs for the MAZDA 2;DEMIO 2003–2007. You can find front lower ball joints and other suspension components on the CARFIX website or at your local CARFIX store.
What are some things to keep an eye on to keep my Mazda 2 / Demio (2003-2007) running smoothly?
To keep your Mazda 2 / Demio (2003-2007) in good shape, regularly inspect and maintain the front suspension (including front lower ball joints, front bump stops and strut boots), braking system (front disc brake rotors and rear brake drums), and address any potential engine oil leaks from the engine oil pan gasket. Replacing the oxygen sensor will also optimize engine efficiency. Also, keep an eye on the rear wheel bearing and hub.