International Scout II Unknown SUV 107kW (1976-1978) AWD Petrol 5.0L (1976–1978)
The International Scout II, built from 1976-1978, holds a special place in SUV history. These tough, American-made vehicles are known for their off-road capability and simple, robust design. Importing one to New Zealand means getting a capable off-roader, but also potentially dealing with rust and the challenges of sourcing parts.
Parts for the International Scout II Unknown SUV 107kW (1976-1978) AWD Petrol 5.0L
Rust is the biggest enemy of the Scout II, especially in coastal climates. Other common issues include worn suspension components (bushings, springs, shocks), leaks from the transfer case and differentials, carburetor problems, and electrical issues. Parts availability can be a challenge, but a network of enthusiast clubs and suppliers exists.
WOF tips
Chassis rust is a major WOF concern. Ensure the brakes are in good working order, and that the suspension is secure and with no excessive play. Pay attention to the condition of the tires, lights, and windscreen. Also check the seatbelts are fitting properly to conform with WOF regulations.
About the International Scout II Unknown SUV 107kW (1976-1978) AWD Petrol 5.0L
The Scout II's charm lies in its no-nonsense approach. With a truck-like chassis and a range of inline-four, inline-six, and V8 engines, it was built to tackle tough terrain. When evaluating a Scout II in NZ, carefully inspect the chassis for rust, paying particular attention to the floor pans, sills, and areas around the suspension mounts. Rebuilding these early SUVs is common in NZ, to return them back to their former glory. Check engine condition is key, as are the brakes, and transmission. The Scout II can be a head turning and capable vehicle when cared for and maintained.
Questions owners ask
What are the most common issues to look out for when buying a 1976-1978 International Scout II in New Zealand?
The biggest enemy of the Scout II, especially in coastal New Zealand, is rust. Pay close attention to the chassis, floor pans, sills, and areas around the suspension mounts. Other common issues include worn suspension components (bushings, springs, shocks), leaks from the transfer case and differentials, carburetor problems, and electrical issues. A pre-purchase inspection is highly recommended.
Where can I get replacement suspension components for my 1976-1978 International Scout II in NZ?
CARFIX stocks 58 SKUs for the International Scout II 1976-1978. While specific suspension components like bushings, springs, and shocks might require sourcing from specialist suppliers or enthusiast clubs, CARFIX can assist with other parts. It's worth noting that rebuilding these early SUVs is common in NZ, and a network of enthusiast clubs and suppliers exists to help with parts availability.
What should I be particularly careful about regarding rust when getting a WOF for my International Scout II 1976-1978?
Chassis rust is a major WOF concern for the International Scout II 1976-1978. Inspectors will pay close attention to the floor pans, sills, and areas around the suspension mounts. Ensure any rust is properly addressed to pass your Warrant of Fitness.
How often should I service my 1976-1978 International Scout II in New Zealand?
Due to the age of the vehicle, servicing every 8000km is wise for the International Scout II 1976-1978 to maintain its condition and reliability.
What are the key mechanical areas to inspect on a 1976-1978 International Scout II before purchase?
When evaluating a Scout II, key areas to inspect include the engine condition, brakes, and transmission. Given its truck-like chassis and capability for tough terrain, also thoroughly check the chassis for rust, especially around suspension mounts, and inspect for leaks from the transfer case and differentials.