CARFIX

Holden Commodore i V6 (2006–2007)

The Holden Commodore (2006-2007) stands as a pillar of New Zealand motoring, offering an impressive range of models that cater to every lifestyle, from family-friendly sedans to sporty wagons. Renowned for its blend of affordability, practicality, and spaciousness, the Commodore has gained a loyal following. Before diving into the used market, it's essential to be aware of its common hiccups, ensuring a savvy choice for your next ride.

Parts for the Holden Commodore i V6

Known issues

Common issues with the 2006-2007 Holden Commodore can include: 1. Timing belt failure (if equipped). 2. Suspension component wear (ball joints, bushes, shock absorbers). 3. Oil leaks (engine and transmission). 4. Electrical issues (sensor failures, window regulators). 5. Rust in the bodywork.

WOF tips

When taking your Holden Commodore for a WOF, pay close attention to these areas: 1. Suspension: Check for worn bushes, ball joints, and shock absorbers. Pay particular attention to any modifications that have been made. 2. Brakes: Ensure brake pads and rotors are in good condition. Check brake lines for corrosion. 3. Tyres: Ensure adequate tread depth and even wear. 4. Lights: All lights must be functioning correctly, including any aftermarket lighting. 5. Rust: Check for structural rust, particularly in sills and around suspension mounting points.

About the Holden Commodore i V6

In terms of performance, the Holden Commodore i V6 was equipped with dependable V6 engines, available with both manual and automatic transmissions, promising a smooth and enjoyable driving experience. While these vehicles offer a comfortable ride with plenty of room for passengers and cargo, regular servicing is crucial for maintaining their reliability. Key areas needing attention include suspension components, which may experience wear, and the timing belt, which should be replaced as per manufacturer recommendations to avoid unexpected issues down the road.

Particularly noteworthy is the cooling system, which requires care around the 150,000 km mark. Essential parts like the water pump, thermostat, and radiator hoses should be inspected as part of your routine maintenance. [This naturally links to /shop/cooling] In addition, common issues with oil leaks and electrical failures can arise, often easily remedied by keeping up with service intervals and using quality parts. For brake maintenance, front and rear brake services are available to keep your stopping power at its best. Whether it’s the oil service to maintain engine health or filtering systems to ensure clean air inside, we recommend staying proactive with your vehicle's upkeep. For more details on these services, explore our braking and filtration categories!

Questions owners ask

What are the common issues to look out for with a 2006-2007 Holden Commodore?
Owners of the 2006-2007 Holden Commodore should be aware of potential issues such as timing belt failure (if equipped), wear in suspension components like ball joints, bushes, and shock absorbers, oil leaks from the engine and transmission, electrical problems including sensor failures and window regulators, and rust in the bodywork.
What should I check on my Holden Commodore 2006-2007 before its WOF inspection in New Zealand?
For a WOF on your Holden Commodore, pay close attention to the suspension for worn bushes, ball joints, and shock absorbers. Ensure brake pads and rotors are in good condition and check brake lines for corrosion. Verify adequate tyre tread depth and even wear, and confirm all lights are functioning. Finally, inspect for structural rust, especially in sills and around suspension mounting points.
When should I replace the timing belt on my 2006-2007 Holden Commodore V6?
The timing belt on your Holden Commodore V6 should be replaced as per manufacturer recommendations to prevent unexpected issues. This is a crucial maintenance item to ensure the longevity of your engine.
Where can I get cooling system parts for my Holden Commodore 2006-2007 in NZ?
CARFIX stocks 773 SKUs for the Holden Commodore 2006-2007. For cooling system parts like the water pump, thermostat, and radiator hoses, which often require attention around the 150,000 km mark, you can find them in our cooling system category.
What maintenance is recommended for the cooling system on a 2006-2007 Holden Commodore?
The cooling system on your Holden Commodore requires particular care around the 150,000 km mark. Essential parts such as the water pump, thermostat, and radiator hoses should be regularly inspected and replaced as part of your routine maintenance to prevent overheating and other issues.
Are there any DIY guides available for common maintenance tasks on my 2006-2007 Holden Commodore?
Yes, CARFIX offers 33 DIY video guides that can assist you with various maintenance tasks on your Holden Commodore 2006-2007, helping you keep up with service intervals and address common issues.