CARFIX

Hillman Minx E11 Sedan 30kW (1958-1959) (1958–1959)

The Hillman Minx, particularly the Series III or IIIA models from around 1958-1959, represents a popular choice for New Zealand families seeking an economical and stylish vehicle. The Minx offered a relatively modern design compared to some of its contemporaries, making it a desirable car for its time. They were assembled in NZ, so have a certain heritage with the country still

Parts for the Hillman Minx E11 Sedan 30kW (1958-1959)

Known issues

Rust is a major issue, especially in the floors, sills, and around the wheel arches. Engine wear, particularly on higher-mileage examples, is common. Suspension bushes and shock absorbers will likely need replacement. Original Lucas electrics can be temperamental. Carburettor and fuel system issues are also fairly common.

WOF tips

Check carefully for rust, especially in structural areas. Brake condition (lines, cylinders, shoes) is critical. Steering play and suspension wear are key WOF failure points. Ensure all lights and indicators are functioning correctly. Oil leaks and general engine condition will also be assessed.

About the Hillman Minx E11 Sedan 30kW (1958-1959)

The Minx was known for its independent front suspension and unit-body construction, providing a more comfortable ride than some of its rivals. Engine options would have been a four-cylinder, providing adequate power for everyday use. As with any car of this age, rust is a major concern. Mechanical systems are relatively straightforward to work on, making them appealing to classic car enthusiasts. Keep in mind original parts were used so regular checking of hoses and electrical contacts are important.

Questions owners ask

What are the most common rust spots to check on a 1958-1959 Hillman Minx in New Zealand?
Rust is a significant concern for the 1958-1959 Hillman Minx. You should pay close attention to the floors, sills, and around the wheel arches, as these are common areas for corrosion. For a WOF, structural rust will be a major failure point.
How often should I service my 1958-1959 Hillman Minx?
The recommended service interval for your 1958-1959 Hillman Minx is every 5000km. Given its age, regular checks of hoses and electrical contacts are also important.
What are the typical WOF failure points for a 1958-1959 Hillman Minx in NZ?
For a 1958-1959 Hillman Minx, common WOF failure points include rust, especially in structural areas. Brake condition (lines, cylinders, and shoes) is critical, as is steering play and suspension wear. Ensure all lights and indicators are functioning, and be aware that oil leaks and general engine condition will also be assessed.
Where can I get replacement suspension bushes and shock absorbers for my 1958-1959 Hillman Minx in NZ?
CARFIX stocks 52 SKUs for the 1958-1959 Hillman Minx. While specific part names aren't listed, suspension bushes and shock absorbers are common wear items for this vehicle, and you should check our catalogue for available parts like SHOCKS / STRUT FRONT.
Are the electrics on a 1958-1959 Hillman Minx reliable?
The original Lucas electrics on the 1958-1959 Hillman Minx can be temperamental. It's advisable to regularly check electrical contacts and wiring, especially given the vehicle's age.
Is the 1958-1959 Hillman Minx easy to work on myself?
Yes, the 1958-1959 Hillman Minx is generally considered relatively simple to work on. Its mechanical systems are straightforward, making it appealing to classic car enthusiasts who enjoy DIY maintenance. However, be prepared for potential issues with original parts and rust.