CARFIX

Ford Ranger Bi-Turbo (2022–present)

The 2022+ Ford Ranger Bi-Turbo redefines what it means to be New Zealand's favorite ute. With its robust 2.0L bi-turbo diesel engine, this next-generation variant not only outperforms its predecessors but also reflects a perfect blend of style, efficiency, and cutting-edge technology. Designed with both work and lifestyle in mind, the Ranger strikes an impressive balance while CARFIX provides all the key service and wear parts to keep your Ranger running at its best.

Parts for the Ford Ranger Bi-Turbo

Known issues

Wastegate actuator faults (P0244/P0248 codes) can cause reduced power or limp mode. DPF regeneration challenges short trips prevent proper soot burning. Transmission shift quality variations early software versions had engagement issues. Electrical system complexity potential for parasitic battery drain. Turbocharger sensor failures can trigger check engine light and reduced performance. Fuel injector wear common on high-km examples, causes rough idle and power loss. Front suspension bush wear particularly on 4x4 models used for heavy work or off-road driving.

WOF tips

Check turbocharger intake and outlet pipes for secure mounting and no visible oil leaks. Inspect DPF system for warning lights or reduced performance indicators. Verify all electronic systems respond correctly no warning lights on dash. Brake pad thickness minimum 3mm these wear faster due to vehicle weight. Suspension bushes must show no excessive play. Tyre tread minimum 1.5mm across full width. Headlight aim critical check vertical and horizontal alignment. Exhaust system must show no significant corrosion or mounting issues.

About the Ford Ranger Bi-Turbo

The Ranger Bi-Turbo boasts a powerful 2.0L inline-4 diesel engine featuring twin sequential turbochargers—one for swift low-end response and another for high-end power. This combination delivers an impressive 156kW and 500Nm, effectively reducing diesel lag. Offered in both 4x2 and 4x4 configurations with a choice of 6-speed manual or advanced 10-speed automatic transmissions, it’s tailored to meet any driving demand.

Maintenance Matters: Ensuring your Ranger remains road-ready involves regular attention to key components. Common parts for replacement include the water pump and thermostat, especially when nearing 150,000km. Regular inspections of the cooling system—as well as the diesel particulate filter and transmission fluid—are critical in maintaining performance. Be sure to check out our cooling, braking, and filtration categories for essential maintenance items.

Known Issues and Solutions: The bi-turbo's complex turbocharging system can present challenges, including wastegate actuator faults that trigger troubleshooting codes like P0244/P0248. It’s vital to tackle these issues promptly to avoid reduced power or limp mode. Regular services at CARFIX will help ensure your vehicle runs smoothly, allowing you to enjoy both city drives and off-road adventures with confidence.

Driving Performance: The electronically complex 10-speed automatic transmission has experienced software challenges in earlier versions, potentially leading to harsh shifts or delays. Ford's TCM updates should be implemented, and using specified fluids during service can keep it shifting smoothly. Consistent maintenance is the key to your Ranger's longevity, and CARFIX is equipped with the right parts to make it happen.

Questions owners ask

What are common issues with the 2.0L Bi-Turbo engine in the 2022-2999 Ford Ranger?
The 2.0L Bi-Turbo engine in the Ford Ranger can experience wastegate actuator faults, often indicated by P0244/P0248 codes, leading to reduced power or limp mode. Regular maintenance and prompt attention to these issues are crucial.
How often should I service my 2022-2999 Ford Ranger in New Zealand?
The recommended service interval for the Ford Ranger 2022-2999 is every 10,000km. Consistent maintenance helps ensure longevity and performance, especially for components like the cooling system, DPF, and transmission fluid.
What should I look out for during a WOF inspection on my 2022-2999 Ford Ranger?
For your Ford Ranger's WOF, pay close attention to turbocharger intake and outlet pipes for secure mounting and oil leaks, DPF system warning lights, and ensuring all electronic systems respond correctly. Brake pad thickness should be a minimum of 3mm, and suspension bushes must not show excessive play. Headlight aim and exhaust system condition are also critical.
Where can I get replacement water pumps and thermostats for my 2022-2999 Ford Ranger in NZ?
CARFIX stocks a wide range of parts for the Ford Ranger 2022-2999, including water pumps and thermostats. These are common replacement items, especially as the vehicle approaches 150,000km. You can find them in our cooling category on the CARFIX website.
My 10-speed automatic transmission in my Ford Ranger is shifting harshly. Is this a known issue?
Yes, earlier versions of the electronically complex 10-speed automatic transmission in the Ford Ranger 2022-2999 experienced software challenges that could lead to harsh shifts or delays. Ford has released TCM updates to address these issues, and using specified fluids during service is important for smooth operation.
What are the common causes of reduced power or limp mode in a 2022-2999 Ford Ranger Bi-Turbo?
Reduced power or limp mode in a Ford Ranger Bi-Turbo is often linked to wastegate actuator faults, which can trigger diagnostic trouble codes like P0244/P0248. Addressing these issues promptly is essential to restore full performance.