Ford Fiesta XMJC,XMJD,XMJA,XMJB (2013–2017)

The Ford Fiesta Base is the ultimate blend of affordability, practicality, and engaging performance, crafted to cater to New Zealand drivers. This compact hatchback is specially designed for effortless city driving and offers an ownership experience that is budget-conscious yet rich in value. Dive into our comprehensive guide that will help you maintain your Fiesta Base, tackle common issues, and enhance your driving experience.

Parts for the Ford Fiesta XMJC,XMJD,XMJA,XMJB

• Steering Rack End (5)
• Tie Rod End (5)
• Brake Pads Front (4)
• Oxygen Sensor (4)
• Strut Mount Front (4)
• Shocks / Strut Rear (3)
• Wiper Blade Front (3)
• Strut Boot/Hatch/Tailgate (2)
• Control Arm Front (2)
• Shocks / Strut Front (2)
• Brake Pads Rear (2)
• Disc Brake Rotor Rear (2)
• Strut Boot Kit Rear (2)
• Sway Bar Link Front (2)
• Engine Mount Rear (2)
• Wheel Bearing Kit/Hub Rear (2)
• Suspension Bush Front Sway Bar Mount (2)
• Engine Mount Right (2)
• Advanced Clutch System (2)
• Cv Joint Boot Kit Front Right Inner (1)
• Cv Joint Front Outer (1)
• Tripod Hub (1)
• Radiator Hose Lower (1)
• Heater Core (1)
• Oxygen Sensor Post-Catalytic Converter (1)
• Engine Oil (1)
• Drive Belt (1)
• Suspension Bush Front Control Arm - Lower (1)
• Wheel Bearing Kit/Hub Front (1)
• Ball Joint Front Lower (1)
• Suspension Bush Front Control Arm (1)
• Strut Boot Kit Front (1)
• Hub Carrier Bush (1)
• Bump Stop Front (1)
• Strut Mount Rear (1)
• Suspension Kit Front (1)
• Steering Rack (1)
• Suspension Bush Front Spring Axle Pivot (1)
• Brake Hose Rear (1)
• Brake Caliper Piston Front (1)
• Engine Oil Pan Gasket (1)
• Drive Belt Alternator (1)
• Oil Seal Crank Shaft Front / Timing Front (1)
• Drive Belt Pulley Idler/Tensioner (1)
• Cv Joint Boot Kit Front Left Inner (1)

Known issues

Common issues for the Ford Fiesta Base may include front suspension wear and potential problems with the Powershift automatic transmission (if equipped). Front suspension typically wears around 80,000 - 120,000 km.

WOF tips

When preparing your Ford Fiesta Base for a Warrant of Fitness (WOF) inspection, pay close attention to corrosion around the fuel filler neck and any excessive play in steering components.

About the Ford Fiesta XMJC,XMJD,XMJA,XMJB

Maintaining Your Ford Fiesta Base

To keep your Ford Fiesta Base running smoothly, regular maintenance is key. Stay ahead of wear and issues with these important tasks:
• Regular Servicing: Stick to the recommended service schedule, including oil and filter changes, for optimal engine health. Aim for servicing every 10,000 km to keep performance steady.
• Suspension Checks: Front suspension wear is common, particularly between 80,000 - 120,000 km. Make sure to inspect and replace worn components like sway bar links, ball joints, and strut mounts to ensure a comfortable ride. Find parts in our Suspension category.
• Braking System: Regularly check your brakes every 20,000 km. Worn pads or rotors could lead to safety issues, so consider a Front Brake Service to maintain stopping power.
• Clutch Health: If you have a manual Fiesta Base, pay attention to your clutch system, which may need addressing after a few years of use.
• Cooling System: The cooling system requires attention around 150,000 km. Parts like the water pump, thermostat, and radiator hoses should all be inspected. Ensure you’re ready to tackle potential problems with our Cooling category.

Potential Issues and What to Watch For

While the Fiesta Base is known for reliability, be on the lookout for common issues:
• Powershift Transmission (If Equipped): If your Ford Fiesta Base has this transmission, you might experience rough shifts or hesitation. Early intervention can prevent costly repairs, so consult a mechanic if you notice these symptoms.
• Front Suspension Wear: Keep an eye on your suspension components around that 80,000 to 120,000 km range to prevent handling issues.

Questions owners ask

What are the common maintenance tasks for a Ford Fiesta 2013–2017 in New Zealand?

For optimal performance, regular servicing including oil and filter changes every 10,000 km is crucial. Additionally, pay attention to front suspension components like sway bar links, ball joints, and strut mounts, especially between 80,000 - 120,000 km. The braking system should be checked every 20,000 km, and the cooling system, including the water pump, thermostat, and radiator hoses, around 150,000 km.

Where can I get replacement suspension parts for my Ford Fiesta 2013–2017 in NZ?

CARFIX stocks a wide range of suspension components for your Ford Fiesta 2013–2017. You can find parts like sway bar links, ball joints, and strut mounts in our Suspension category to address common wear between 80,000 - 120,000 km.

What should I look out for during a WOF inspection for my Ford Fiesta 2013–2017?

When preparing your Ford Fiesta 2013–2017 for a WOF, specifically check for corrosion around the fuel filler neck and any excessive play in the steering components. Addressing these can help ensure a smooth inspection.

Are there any known transmission issues with the Ford Fiesta 2013–2017?

If your Ford Fiesta 2013–2017 is equipped with the Powershift automatic transmission, you might experience rough shifts or hesitation. It's advisable to consult a mechanic if you notice these symptoms to prevent more costly repairs.

How often should I check the brakes on my Ford Fiesta 2013–2017?

It's recommended to regularly check your Ford Fiesta 2013–2017's braking system every 20,000 km. Worn pads or rotors can compromise safety, so consider a Front Brake Service if needed.

When should I consider replacing cooling system components on my Ford Fiesta 2013–2017?

The cooling system on your Ford Fiesta 2013–2017 typically requires attention around 150,000 km. At this point, parts such as the water pump, thermostat, and radiator hoses should be inspected and replaced if necessary.