CARFIX

Ford Endura BCCA,BCCB (2018–2019)

Welcome to the CARFIX Vehicle Wiki for the FORD ENDURA Base. This guide provides valuable insights into maintaining your Endura, helping you understand its common issues and prepare for Warrant of Fitness (WOF) inspections. The Endura aimed to provide a comfortable and practical SUV option for families.

Parts for the Ford Endura BCCA,BCCB

Known issues

<p>Like any vehicle, the FORD ENDURA Base can experience common issues over time. Owners have reported the following:</p>
<ul>
<li><b>Sync3 Touchscreen Problems:</b> Watch for potential software glitches or unresponsiveness in the Sync3 infotainment system.</li>
<li><b>Coolant Leaks:</b> Be aware of potential coolant leaks, particularly around the thermostat housing.</li>
</ul>
<p>These issues typically start to appear around 50,000 to 100,000 kilometers.</p>

WOF tips

<p>When preparing your FORD ENDURA Base for a Warrant of Fitness (WOF) inspection, pay close attention to these areas:</p>
<ul>
<li><b>Tyre Wear:</b> Closely monitor tyre wear, especially on lower trims. The suspension setup may contribute to uneven wear patterns.</li>
<li><b>Rear Suspension Bushes:</b> Inspect the rear suspension bushes, as they can be prone to premature wear.</li>
</ul>

About the Ford Endura BCCA,BCCB

<p>While the FORD ENDURA might not boast a rich motorsport pedigree or groundbreaking engineering firsts, it filled an important space in Ford's SUV lineup. Positioned between the smaller EcoSport/Escape and the larger Everest, the Endura offered New Zealand families a spacious, comfortable, and relatively fuel-efficient vehicle without the need for a full-sized 7-seater.</p>

<p><b>Maintenance & Care:</b> Keeping your Endura in top condition involves routine maintenance. Consider these areas as part of your regular servicing schedule:</p>
<ul>
<li><b>Wiper Blades:</b> Regularly inspect and replace your front wiper blades (both driver and passenger side). Using front wiper refills can prolong blade life.</li>
<li><b>Cooling System:</b> The cooling system is crucial for engine health. This includes checking the radiator coolant level and condition, inspecting the radiator cap, and monitoring the temperature sensor/sender coolant.</li>
<li><b>Braking System:</b> Ensure the rear brake pads and disc brake rotors are inspected and replaced as needed to maintain optimal braking performance. Also monitor the switch stop light functionality.</li>
<li><b>Engine Sensors:</b> Faulty readings from the sensor crank angle can cause running issues and increased fuel consumption.</li>
<li><b>Exhaust System:</b> Ensure you are topping off the additive exhaust as needed to reduce emmissions</li>
<li><b>Transmission:</b> Service your automatic transmission and ensure the correct automatic transmission fluid is used.</li>
<li><b>Glow Plugs:</b> If your model has glow plugs then ensure that these are maintained for easy and efficient starting.</li>
<li><b>EGR Cooler:</b> Check for any signs of issues with the EGR cooler.</li>
</ul>

Questions owners ask

What are some common problems I might encounter with a 2018-2019 Ford Endura in New Zealand?
Some Ford Endura owners have reported issues with the Sync3 touchscreen, such as software glitches or unresponsiveness. Coolant leaks, particularly around the thermostat housing, are also a potential concern. These issues tend to surface between 50,000 and 100,000 kilometers.
What should I pay special attention to when getting a WOF for my Ford Endura?
For your Ford Endura's WOF, make sure to inspect the tyres for wear, as the suspension setup can sometimes lead to uneven wear patterns. Also, carefully check the rear suspension bushes, as they can be prone to premature wear.
What kind of maintenance should I be doing on my Ford Endura to keep it running smoothly?
Regular maintenance is key. Be sure to inspect and replace your front wiper blades (both driver and passenger side), check your radiator coolant level and condition, and monitor your rear brake pads and disc brake rotors. Also, ensure you are topping off the additive exhaust as needed to reduce emmissions. Servicing your automatic transmission with the correct automatic transmission fluid is also important.
Where can I get replacement wiper blades for my 2018-2019 Ford Endura in NZ?
CARFIX stocks a range of wiper blades suitable for the Ford Endura 2018-2019. We also stock front wiper refills to prolong blade life. With 113 SKUs available for this vehicle, you'll find what you need.
How often should I service my Ford Endura?
The recommended service interval for the Ford Endura is 15,000km.
What should I do if my Ford Endura's Sync3 touchscreen is not working properly?
If your Sync3 touchscreen is glitching or unresponsive, try restarting the system first. If the problem persists, it may require a software update or professional diagnosis. This is a known issue that can appear around 50,000 to 100,000 kilometers.
What are the common causes of coolant leaks in the Ford Endura?
Coolant leaks in the Ford Endura can often occur around the thermostat housing. Regularly check the coolant level and inspect for any signs of leaks to prevent potential engine damage. This is a known issue that can appear around 50,000 to 100,000 kilometers.