CARFIX

Ford E TD (1993–1998)

The Ford E TD, particularly the Econovan model, has been a reliable workhorse on New Zealand roads, serving tradespeople and delivery services with its practical and affordable design. This guide provides valuable insights into maintaining your Ford E TD, helping you keep it running smoothly for years to come.

Parts for the Ford E TD

Known issues

Owners should be aware of potential issues that can arise with the Ford E TD, particularly as mileage increases. Some commonly reported problems include:
• Automatic Transmission Failures: Watch for slipping gears or rough shifting, especially in vehicles with higher mileage (150,000 - 250,000 km).
• Coolant Leaks: Inspect for coolant leaks around the cylinder head. Address leaks promptly to prevent engine overheating and potential damage.

WOF tips

During your Warrant of Fitness (WOF) inspection, be mindful of the following areas, as they are commonly checked on Ford E TD models:
• Rust: Pay close attention to rust around the windscreen and rear wheel arches. Rust can compromise structural integrity and lead to WOF failures.
• Brake Lines: Ensure the brake lines are in good condition and free from leaks. Any signs of corrosion or damage should be addressed immediately to maintain braking performance.

About the Ford E TD

For many Kiwis, the Ford Econovan represents a reliable and practical solution for business and everyday use. Understanding its quirks and maintenance needs is key to keeping it on the road.

Maintenance Matters

Regular maintenance is crucial for any vehicle, and the Ford E TD is no exception. Key components to monitor routinely include:
• Brake Pads (Front): Ensure sufficient brake pad thickness for safe stopping power. Listen for squealing or grinding noises which can indicate wear.
• Wiper Blades (Front): Replace worn or damaged wiper blades to maintain clear visibility, especially during New Zealand's wet weather.
• Drive Belt Tensioner Assembly: A properly functioning tensioner keeps the drive belt at the correct tension, ensuring efficient operation of engine accessories.

Questions owners ask

What are some common problems I should watch out for on my Ford Econovan?
Keep an eye out for potential automatic transmission failures, especially if your Econovan has clocked up between 150,000 and 250,000 km. Also, be vigilant for coolant leaks around the cylinder head, as these can lead to overheating.
How often should I service my Ford E TD?
The recommended service interval for your Ford E TD is every 10,000km. Sticking to this schedule will help keep it running smoothly.
What should I check for on my Ford Econovan to pass its WOF in New Zealand?
When taking your Ford Econovan for a WOF, pay close attention to rust, especially around the windscreen and rear wheel arches. Also, ensure your brake lines are in good condition and free from leaks, as these are common WOF failure points.
Where can I get front brake pads for my FORD E 1993–1998 in NZ?
CARFIX stocks 3 SKUs for the FORD E 1993–1998. You can find suitable front brake pads, wiper blades and drive belt tensioner assemblies on the CARFIX website or at your local store.
How important is it to replace my wiper blades on my Ford Econovan?
Replacing worn wiper blades is crucial, especially with New Zealand's frequent rain. Clear visibility is essential for safe driving, so make sure your wiper blades are in good condition.
What's the deal with the drive belt tensioner on my Ford E TD?
The drive belt tensioner assembly is important for maintaining the correct tension on the drive belt. This ensures efficient operation of engine accessories. If it's faulty, get it checked out.
Are there any common rust spots I should be aware of on my Ford Econovan for WOF purposes?
Yes, rust around the windscreen and rear wheel arches are common issues on the Ford Econovan and are checked during a WOF inspection. Address any rust promptly to avoid WOF failure.