CARFIX

Ford Consul OHV (104 ci) Ute 44kW (1959–1962)

The FORD CONSUL Base graced the roads of New Zealand during the early 1960s, becoming a favorite among families looking to upgrade from smaller British models. With its robust performance and spacious design, this classic vehicle embodies the spirit of adventure and family life. In this guide, we'll share vital maintenance tips to keep your CONSUL running smoothly, so you can continue to create cherished memories on the road.

Parts for the Ford Consul OHV (104 ci) Ute 44kW

Known issues

Owners of the FORD CONSUL Base should be aware of a few common issues:
• Kingpin Wear: Excessive wear in the kingpins is a potential issue that can affect steering and handling. Regular inspection and lubrication are important.
• Rust: Rust can be a significant problem, especially in the sills and wheel arches. Regular cleaning and rust prevention measures are highly recommended.

Many of these issues surface around the 80,000 to 120,000 km mark, so paying close attention during this period is advisable.

WOF tips

When taking your FORD CONSUL Base for a Warrant of Fitness (WoF) inspection in New Zealand, be mindful of the following points:
• Steering Linkage Play: Excessive play in the steering linkage will likely result in a failed WoF. Ensure the steering system is in good condition.
• Floor Pan Corrosion: Corrosion in the floor pans, particularly near the jacking points, is another common WoF failure point. Inspect these areas regularly and address any rust promptly.

About the Ford Consul OHV (104 ci) Ute 44kW

Owning a classic like the FORD CONSUL Base requires diligence in maintenance to ensure every ride is smooth and enjoyable. Regular checks and proactive care can help prevent common issues and keep your vehicle performing at its best.

Key Maintenance Considerations:
• Engine Oil: Regular oil changes are crucial for engine health. Aim for changes every 5,000 km to ensure longevity. Consider upgrading to high-quality filters from our Filtration category for enhanced performance.
• Gearbox and Axle Oils: These should be checked at every 10,000 km service to avoid undue wear and ensure seamless shifting. Proper lubrication can prevent costly repairs down the line.
• Braking System: Given that the FORD CONSUL Base can experience wear, pay special attention to brake pads and rotors, especially if you're nearing the 80,000 km mark. Our Braking service pack is tailored to keep your brakes in top shape.
• Cooling System: The cooling system requires attention around 150,000 km, so make sure to inspect the water pump, thermostat, and radiator hoses. Regular maintenance here can prevent overheating issues. Check out our Cooling products for reliable components.

If you're a DIY enthusiast, the CONSUL Base is reasonably user-friendly. However, some tasks might require specific tools or expertise. Regardless, staying vigilant about common issues like kingpin wear and rust can help maintain its performance and integrity.

Questions owners ask

How often should I change the oil in my 1959-1962 FORD CONSUL?
To keep your FORD CONSUL running smoothly, aim for oil changes every 5,000 km. Consider using high-quality oil filters from our Filtration category to enhance engine performance and longevity.
What are some common rust areas I should watch out for on my FORD CONSUL in New Zealand?
Rust is a common issue, especially in the sills and wheel arches of the FORD CONSUL. Regular cleaning and rust prevention measures are highly recommended to protect these areas.
What should I check on my FORD CONSUL before taking it for a WoF in NZ?
When preparing your FORD CONSUL for a WoF, pay close attention to steering linkage play and floor pan corrosion. Excessive play in the steering linkage and corrosion, particularly near the jacking points, are common reasons for WoF failures.
Where can I get brake pads for my 1959-1962 FORD CONSUL in NZ?
CARFIX stocks 47 SKUs for the FORD CONSUL 1959-1962. Check out our Braking service pack for brake pads and other components to keep your brakes in top shape. Pay special attention to brake pads and rotors, especially if you're nearing the 80,000 km mark.
How often should I check the gearbox and axle oils on my classic FORD CONSUL?
It's best to check the gearbox and axle oils on your FORD CONSUL every 10,000 km. This helps prevent undue wear and ensures seamless shifting, avoiding costly repairs down the line.
What are the signs of kingpin wear in a FORD CONSUL and why is it important?
Excessive wear in the kingpins is a potential issue that can affect steering and handling in your FORD CONSUL. Regular inspection and lubrication are important to maintain proper steering response.
When does the cooling system of my FORD CONSUL need attention?
The cooling system of your FORD CONSUL requires attention around 150,000 km. Make sure to inspect the water pump, thermostat, and radiator hoses. Regular maintenance here can prevent overheating issues. Check out our Cooling products for reliable components.