The Ford Anglia Base, a practical and affordable small car from the 1960s, holds a special place in automotive history for many. This guide provides essential information to help Anglia owners maintain and enjoy their vehicles.
Anglia owners often encounter specific challenges:
• Overheating: Due to the small radiator size, overheating can be a problem, especially in warmer climates.
• King Pin Suspension Wear: The king pin suspension is prone to wear, leading to handling issues and potential WoF failures.
• Gearbox Troubles: The synchromesh in first and second gears is known to be weak, resulting in difficulty shifting.
When preparing your Ford Anglia Base for a WoF inspection, pay close attention to these common trouble spots:
• Front suspension trunnions: Excessive wear in the front suspension trunnions is a frequent cause of failure. Ensure these are properly lubricated and in good condition.
• Rust: Check for rust in the sills and floor pans, as this is another common area for WoF failures.
Owning a classic like the Ford Anglia Base requires proactive maintenance and an awareness of potential issues. Regular servicing is crucial for preserving its reliability.
Maintenance Essentials:
• Lubrication: Regularly check and maintain lubrication points, especially within the front suspension trunnions, as wear in these areas is a common WoF failure point.
• Cooling System: Keep the cooling system in good order to mitigate the tendency for overheating. Consider flushing and inspecting the radiator periodically.
• Gearbox Synchromesh: Be mindful of the synchromesh, particularly in first and second gears. Smooth gear changes can help prolong its life.
Component Focus:
• When servicing, inspect the cylinder head gasket for leaks. A new conversion gasket set might be useful during extensive maintenance. Replace spark plugs following the service interval.
• Pay attention to the crankshaft thrust washer for wear, especially if experiencing excessive engine movement. Consider replacing the timing chain and inspecting the camshaft bearing according to the manufacturer's recommendations or if any rattling is detected.
• Ensure the distributor rotor is in good condition for optimal ignition. Check the reverse lamp switch functionality. The timing kit should be inspected for wear at regular service intervals.
• Inspect and maintain the condition of the universal joint/coupling front & rear. Inspect the universal joint / coupling front. Because they are load bearing, the wheel bearing kit/hub front should be inspected frequently.
• Ensure the alternator or generator is functioning correctly, maintain the axle gear oil level.
Addressing wear and tear promptly will keep your Anglia Base running smoothly.