Chevrolet Chevy II Unknown Sedan 67kW (1965-1967) (1965–1967)
The Chevrolet Chevy II, later known as the Nova, was a compact car designed to compete with smaller imports. The 1965-1967 models offer a blend of simplicity and practicality. For NZ enthusiasts considering one, understanding its technical aspects is crucial.
Parts for the Chevrolet Chevy II Unknown Sedan 67kW (1965-1967)
Rust is the primary concern, especially in body panels, floor pans, and around windows. The Powerglide transmission is simple but lacks the efficiency of modern automatics. Carburetors may require tuning. Wiring can become brittle. Suspension components are prone to wear.
WOF tips
Rust is critical for the NZ WOF. All lights must be functioning, seatbelts in good condition, and brakes must perform adequately and checked. Steering play is checked, and any excessive play in the steering linkage is a failure point. Aftermarket modifications may need certification.
About the Chevrolet Chevy II Unknown Sedan 67kW (1965-1967)
The Chevy II came with a variety of engines, including inline-fours, inline-sixes, and small-block V8s. Transmissions were typically either a manual (3 or 4-speed) or a 2-speed Powerglide automatic. Suspension consisted of independent front suspension and a solid rear axle with leaf springs. Brakes were usually drums all around. Electrical systems were straightforward. Its simple design made it relatively easy to maintain.
Questions owners ask
What are the common rust areas on a 1965-1967 Chevrolet Chevy II in New Zealand?
Rust is a significant concern for Chevy IIs, especially in New Zealand's climate. Key areas to inspect include body panels, floor pans, and around the windows. Regular rust prevention treatments are recommended.
What are the common mechanical issues with the Chevy II's Powerglide transmission?
The 2-speed Powerglide automatic transmission, while simple, is known for its lack of efficiency compared to modern automatics. Common issues include slipping, rough shifting, and leaks. Regular fluid changes are crucial for maintaining its performance.
What should I check on my 1965-1967 Chevrolet Chevy II to pass a WOF in New Zealand?
For a WOF, ensure there's no excessive rust, particularly in structural areas. All lights must be functioning correctly, and seatbelts must be in good condition. Brakes need to perform adequately. Steering play is checked, and any excessive play in the steering linkage will cause a failure. Aftermarket modifications may require certification.
Where can I get parts for my 1965-1967 Chevrolet Chevy II in NZ?
CARFIX stocks 2 SKUs for the Chevrolet Chevy II. Check our website or visit a store to find parts like replacement lights, brake components, and other essential maintenance items.
How often should I service my 1965-1967 Chevrolet Chevy II?
A service interval of 5000km is recommended for the Chevrolet Chevy II. Regular servicing helps maintain its reliability, especially given its age.
What type of suspension does the Chevy II have, and what are common wear points?
The Chevy II features independent front suspension and a solid rear axle with leaf springs. Common wear points include the suspension bushings, ball joints, and leaf springs. Inspect these components regularly for wear and tear.
What are some common carburetor issues with the Chevy II and how can I address them?
Carburetors on the Chevy II can require tuning to ensure optimal engine performance. Common issues include rough idling, poor fuel economy, and difficulty starting. Regular cleaning and adjustment are necessary to keep the carburetor functioning properly.