The Bristol Arnolt, produced during the mid-1950s, represents an interesting collaboration between British engineering (Bristol) and American design. These cars, rarer than standard Bristols, offer a distinctive blend of performance and style. Likely very few made their way into New Zealand back in the day.
Known issues
Corrosion, especially on the bodywork, is a primary concern. Engine and drivetrain components will suffer similar wear and tear to other Bristol models of this era. Sourcing unique trim pieces and body parts can be extremely difficult.
WOF tips
WOF checks should focus on structural integrity, particularly any rust in the chassis and the condition of the suspension. Brakes must be in good working order. The Bertone bodywork needs to be checked for any damage (not that it would cause a warrant failure). As with other classics, ensure headlights and other electrical components are in good working condition.
About the Bristol Arnolt 100C
Built on Bristol's reliable 404 chassis and powered by the famed Bristol inline-six, the Arnolt featured coachwork by Italian design house Bertone. This gave the car a unique look that some loved and some found divisive. Maintenance considerations will largely be the same as other Bristol models from this period, with the added challenge of Bertone-specific body panels.
Questions owners ask
What are the common rust spots I should check on my 1953-1955 Bristol Arnolt?
Given the Arnolt's age and Bertone-designed body, corrosion is a significant concern. Pay close attention to the chassis, sills, and lower body panels. Also inspect around the headlights, taillights, and any areas where water might accumulate. Because of the Bertone body, sourcing replacement panels can be difficult, so early detection is key.
What should I focus on during a WOF check for my Bristol Arnolt?
For a WOF, the inspector will pay close attention to the structural integrity of the chassis, looking for rust or damage. The brakes must be in good working order. The Bertone bodywork will be checked for general condition, but is unlikely to cause a warrant failure unless it presents a safety hazard. Headlights, taillights, and other electrical components must be functioning correctly.
Where can I get parts for my 1953-1955 Bristol Arnolt in NZ?
CARFIX stocks a limited number of parts (2 SKUs) suitable for the 1953-1955 Bristol Arnolt. While we may not have everything you need due to the vehicle's age and rarity, we can supply some common maintenance items. For more specialized parts, you may need to contact classic car specialists or import directly.
What is the recommended service interval for a 1953-1955 Bristol Arnolt?
The recommended service interval for the Bristol Arnolt is every 5000km. Regular servicing is crucial to maintaining its reliability and preserving its value as a classic car.
Are the engine and drivetrain parts the same as other Bristol models from the 1950s?
Yes, the engine and drivetrain components of the Bristol Arnolt are largely the same as other Bristol models from the same era (such as the 404, on whose chassis it was built). This means that parts availability for these components is generally better than for the Bertone-specific body panels.
What kind of maintenance is required to keep the Bertone body in good condition?
Maintaining the Bertone bodywork requires regular cleaning and waxing to protect the paint from the elements. Promptly address any rust spots to prevent them from spreading. Due to the rarity of the body panels, consider professional restoration if significant damage occurs.
What are the most challenging aspects of owning a Bristol Arnolt in New Zealand?
The biggest challenges are sourcing parts, especially body panels unique to the Bertone design, and finding mechanics experienced with classic Bristol vehicles. Corrosion prevention is also crucial due to the age of the car and the potential difficulty in repairing or replacing damaged panels.