CARFIX

Bristol 403 2 Litre (1953–1955)

The Bristol 403, produced from 1953 to 1955, represents a significant step in the evolution of Bristol Cars. Building upon the 401 and 400, it offered improved performance and refinement, solidifying Bristol's reputation for building quality grand touring motorcars. These are rare and sought-after pieces of automotive history here in New Zealand. Finding parts can be a challenge, but the dedicated Bristol community can be surprisingly helpful.

Known issues

Common issues include corrosion, especially in structural areas, and wear on the engine's valve train. Original carburetors can also be problematic and may require specialist attention. The electrical components, often Lucas, may also cause issues, particularly with grounds. Sourcing parts can be challenging, but a number of specialists still cater to these vehicles.

WOF tips

Expect thorough scrutiny of the suspension components, particularly the kingpins and bushings. Brake condition is critical given the car's age and the performance capabilities of the upgraded Bristol engine. Check for any rust, especially around the chassis and suspension mounting points; any significant corrosion is likely to result in a failed WOF. Also, inspect the operation of all lights, as functionality and correct lenses are important. Ensure seatbelts (if retrofitted) are compliant and properly anchored.

About the Bristol 403 2 Litre

The 403 retained the familiar BMW-derived straight-six engine but with improved cylinder heads and carburation from its predecessor. This resulted in a modest power increase. Suspension was independent at the front and live axle at the rear. The chassis was a robust steel frame. Inside, the 403 was more luxurious than earlier Bristols, with better trim and improved sound insulation. Care and expertise are paramount to keeping these cars running smoothly in New Zealand. Due consideration needs to be paid to corrosion in our climate.