CARFIX

NGK STD V-Groove Resistor Spark Plug

NGK Spark Plugs — NGK STD V-Groove Resistor Spark Plug — part number ZFR6A-11

NGK Spark Plugs · Part number ZFR6A-11 · NZ$26.00 incl. GST

Need new spark plugs for your Mazda MX-6 or Ford Telstar TX5 EFi Turbo? Gotta keep that engine firing on all cylinders!

Price

NZ$26.00 including GST. Part number ZFR6A-11.

Fits these vehicles

Description

Spark Plug Replacement: A Kiwi DIY Guide with NGK
> Spark plugs? They're the little blighters that give your engine the spark it needs to go like the wind. Give 'em a decent hiding over time, and they'll start letting you down with misfires and rough running, especially in performance cars like the Mazda MX-6 i Turbo or even your trusty old Mazda 626.
Spotting the Warning Signs
• Engine's misfiring, idling rough as guts, and hesitating like it's seen a ghost.
• Fuel economy's gone down the gurgler.
• Engine's a pain to start, especially when it's cold enough to freeze the balls off a brass monkey.
• That pesky check engine light's lit up like a Christmas tree.
• Acceleration's about as exciting as watching paint dry.
WOF Woes?
Spark plugs aren't directly on the WOF hit list. But if they're causing your engine to run rough and pump out too many fumes, you might be facing a WOF fail. Best to get 'em sorted!
DIY or Hand it Over?
Difficulty: 6/10
Estimated Time: 1-2 hours
Bob's Two Cents
Swapping out your spark plugs is a no-brainer for keeping your engine sweet and your fuel bills down. A tired spark plug can cause all sorts of grief, from guzzling gas to idling like a tractor. Pop into Bob's Shop, and we'll get you sorted with the right parts for your Mazda or Ford. I'm always here to lend a hand!
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, grab these essentials to make the job smoother and safer:
• Safety First: Don't be a goose! Always wear Safety Glasses to protect your peepers from flying crud.
• Glove Up: Keep your hands clean and protected with a pair of Nitrile Gloves. No one likes greasy mitts.
• Spark Plug Socket: Make sure you get the right size socket to avoid damaging the spark plugs.
• Cleanliness Counts: Give those spark plug holes a quick blast with some Brake Cleaner to remove any gunk before installing the new plugs. This helps ensure a good connection.
• Torque Wrench: Don't overtighten! Use a torque wrench to tighten the new plugs to the manufacturer's spec. Too tight and you risk damaging the threads in the head.

Fitment Notes
Double-check you're grabbing the right spark plug for your specific engine. Turbo models like the Ford Telstar TX5 EFi Turbo and Mazda 626 i Turbo need the right heat range to avoid pre-ignition or fouling. Get it wrong, and you'll be kicking yourself later. Head over to Bob's Shop for a yarn!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.