NGK Spark Plugs · Part number ZFR5F · NZ$22.00 incl. GST
NGK STD V-Groove Resistor Spark Plug by NGK Spark Plugs, part number ZFR5F.
NZ$22.00 including GST. Part number ZFR5F.
Spark Plug Change-Out Guide — Starring NGK
> Spark plugs, right? They're what give your engine the zap it needs to get going. Over time, they wear down from all the sparking and burning, which can lead to a rough ride and less power – especially if you're driving a daily like a BMW 750i or a trusty Holden Combo.
Spotting Dodgy Spark Plugs
• Engine's misfiring, especially when you put your foot down
• Idling rough as guts
• Guzzling more petrol than usual
• Struggling to start the engine
• That pesky engine light's on
WOF Worthy?
Buggered spark plugs can mean more emissions, which could mean a WOF fail. No good!
DIY or Get a Pro?
Difficulty: 6/10
Time Needed: Give yourself an hour or two.
Gear You'll Need: Spark plug socket, ratchet, torque wrench, spark plug gap tool, anti-seize compound.
🛠️ Bob's "Get It Done Right" Companion Checklist
Right, before you get cracking, let's sort out a few must-haves to make this job a piece of cake and keep you safe, eh?
• Safety First, Mate!: Grab some Safety Glasses to keep sparks and grime out of your eyes. Trust me, you'll thank me later.
• Glove Up: Get yourself some Nitrile Gloves. Keeps the hands clean.
• Anti-Seize: Pop a dab of anti-seize on the threads of the new plugs. Makes life easier next time around.
• Spark Plug Gap Tool: Get a spark plug gap tool so that the spark plug is sparking at the correct distance.
Expert Recommendation
Changing your spark plugs when you're supposed to is a no-brainer for keeping your engine happy and your petrol bills down. Bob at CARFIX is always around to sort you out with the right part for your [Vehicle Type]. Pop into Bob's Shop for a yarn!
Fitment Notes
Make sure you get the right spark plug and gap for your engine. Check your car's manual for the exact specs, especially if you're dealing with something fancy like a BMW 850 CSi and its V12.
Bob's waiting to help! Swing by the shop!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.