
Ryco Filters · Part number Z775 · NZ$162.00 incl. GST
Need a new oil filter for your hardworking Nissan Atlas or Toyota Dyna? This RYCO oil filter is just the ticket to keep your engine humming.
NZ$162.00 including GST. Part number Z775.
Oil Filter Replacement Guide — Featuring RYCO
> Oil filters are the unsung heroes of your engine, keeping out all the nasty bits and bobs that can cause serious damage, especially in commercial vehicles like the Toyota Dyna and Nissan Atlas that work hard day in, day out.
Symptoms That Led You Here
• Reduced engine performance
• Increased engine noise
• Dirty or discolored engine oil
• Oil pressure warning light illumination
• Visible debris or particles in the oil
Will it pass WOF?
Yes, provided there are no significant oil leaks and the engine is in good working order. A blocked or damaged oil filter can contribute to engine issues that may cause a WOF failure.
DIY or Workshop?
Difficulty: 4/10
Estimated Time: 30-60 minutes
Tools Required: Oil filter wrench, socket set, drain pan, gloves, and rags.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, mate, safety first! Make sure your Dyna or Atlas is parked on level ground, and chock those wheels. Never get under a vehicle supported only by a jack—use proper stands! Got your Nitrile Gloves handy? They'll keep your mitts clean. And don't forget an oil drip tray to catch the old oil and keep your driveway pristine. It's also a top idea to grab some engine flush additive to give your engine a good clean before you change the oil and filter.
And when you're done, dispose of the old oil responsibly – your local council should have a recycling program.
Expert Recommendation
Regular oil filter replacement is crucial for maintaining the longevity and performance of your commercial vehicle's engine. Bob @ CARFIX is always on hand to help you work out exactly what part you need for your Toyota Dyna or Nissan Atlas. Make sure you head over to Bob's Shop for a chat!
Fitment Notes
Ensure the correct oil filter is selected for your specific vehicle model and engine type. Always check the manufacturer's specifications and follow proper installation procedures.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> HPRD15005)](/parts/HPRD15005) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.