Ryco Filters · Part number Z499 · NZ$86.00 incl. GST
Keepin' your Ford Transit, Focus, or LDV Convoy runnin' sweet as? Oil filters are the unsung heroes, catchin' all the nasty bits in your engine oil. RYCO's a solid choice, and we've got plenty of others.
NZ$86.00 including GST. Part number Z499.
Oil Filter Change-Out: The RYCO Way
> Oil filters are like the bouncers at the entrance to your engine, keepin' out the riff-raff (read: contaminants) that can cause all sorts of trouble. Especially important if you're thrashing your Transit for work or just cruisin' in your Focus.
What Clued You In?
• Engine's feelin' a bit sluggish?
• Guzzling more gas than usual?
• Hearin' some funny knocks and bangs?
• That oil pressure light's flickerin' like a dodgy Christmas tree?
• Oil's lookin' like mud when you check it?
WOF Worthy?
Oil leaks are a surefire way to fail that WOF check. A good oil filter helps keep things sealed up tight and your engine bay clean, so you can breeze through that inspection, no worries.
DIY or Get a Pro?
Difficulty: 4/10
Time Needed: 30-60 minutes
Gear You'll Need: Oil filter wrench, socket set, drain pan, fresh oil, and some gloves to keep those mitts clean.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get crackin', mate, a few things to keep in mind. Firstly, safety's the name of the game. Always use axle stands if you're lifting your vehicle. Never trust just the jack! Grab yourself some Nitrile Gloves to keep your hands clean, and Safety Glasses to avoid any oil splashbacks. Have a can of Engine Flush Additives handy to give the engine a good internal clean before draining, and an Oil Drip Tray to catch the old oil. And don't forget some rags to wipe up any spills. Better to be safe than sorry, eh?
Bob's Two Cents
Regular oil filter swaps are a no-brainer to keep your Transit, Focus, or Convoy purring like a kitten. Pop into Bob's Shop, and we'll sort you out with exactly what you need. Too easy!
Fitment Notes
Double-check you've got the right oil filter for your engine and year model. The manufacturer's specs are your best mate here. Give Bob a yell to make sure.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> HPRD15005)](/parts/HPRD15005) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.