Ryco Spin-On Oil Filter

Ryco Filters · Part number Z442 · NZ$27.00 incl. GST

Ryco Spin-On Oil Filter by Ryco Filters, part number Z442.

Price

NZ$27.00 including GST. Part number Z442.

Fits these vehicles

• Mazda Familia (2007–2018)
• Mitsubishi Lancer (1991–1995)
• Mitsubishi Lancer (2007+)
• Nissan
• Nissan
• Nissan
• Nissan
• Nissan
• Nissan
• Nissan
• Nissan
• Nissan
• Nissan
• Nissan
• Nissan
• Nissan 100NX (1991–1994)
• Nissan 180SX (1991–1994)
• Nissan 180SX (1991–1999)
• Nissan 180SX (1992–1997)
• Nissan 200SX (1988–1993)
• Nissan 200SX (1993–1998)
• Nissan 200SX (1993–1999)
• Nissan 200SX (1994–1999)
• Nissan 200SX (1999–2002)
• Nissan 200SX (1999–2002)
• Nissan 200SX (1999–2003)
• Nissan 200SX (1999–2003)
• Nissan 200SX (1999–2003)
• Nissan 200SX (2000–2001)
• Nissan AD (2006+)
• Nissan Avenir (1990–1993)
• Nissan Avenir (1990–1997)
• Nissan Avenir (1993–1997)
• Nissan Avenir (1995–1998)
• Nissan Avenir (1997–2005)
• Nissan Avenir (1998–2001)
• Nissan Bluebird (1984–1986)
• Nissan Bluebird (1984–1986)
• Nissan Bluebird (1989–1991)
• Nissan Bluebird (1998–2001)

Description

Oil Filter: The RYCO Replacement Guide for Your Nissan
> Oil filters are the unsung heroes, trapping all the gritty bits in your engine oil. For Nissans like the Navara and Primera – workhorses and daily drivers – a clean filter is key to keeping them running sweet as a nut for years to come.

Spotting the Signs of a Dodgy Filter
• Engine's lost its mojo?
• Sounds a bit rough?
• Oil pressure light's playing up?
• Oil looks like treacle?
• Gunk city under the oil cap?

WOF Worries?
Nah, you're sweet as long as there are no oil leaks from a dodgy or missing filter. A clean bill of health for your Warrant of Fitness!

DIY or Get a Pro?
Difficulty: 4/10
Time: Give yourself 30-60 minutes.
Gear you'll need: Oil filter wrench, socket set, drain pan, fresh oil, gloves, and rags.

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, a few quick pointers to keep things smooth and safe:
• Safety First, Mates! Never get under a car supported only by a jack! Use proper axle stands – they're cheap insurance against a nasty accident.
• Cleanliness is Next to Godliness: Give the area around the filter a good wipe down with a rag. Stops crud from falling into the engine when you remove the old filter.
• Don't Forget the Lube: Lightly oil the rubber gasket on the new filter with fresh engine oil. This helps it seal properly and makes it easier to remove next time.
• Catch those drips! Have an oil drip tray handy to catch spills. Makes clean-up a breeze and keeps the missus happy.
• Hand Protection: Use Nitrile Gloves to keep your hands clean and protected from old oil.
• Engine Flush: Before you drain the old oil, consider using an Engine Flush additive to help remove stubborn deposits and sludge.

Expert Recommendation
Keeping on top of oil and filter changes is a no-brainer for a healthy Nissan engine. A fresh filter keeps the oil contaminant-free, reducing wear and tear. Bob @ CARFIX is your go-to guy for sussing out the perfect part for your Nissan. Pop into Bob's Shop for a yarn!

Fitment Notes
Double-check you've got the right filter for your specific Nissan model and engine. Compatibility can vary depending on the year and model. Check the thread size and gasket diameter to be sure. This filter fits a wide range of Nissans, including Primera, Navara, Micra, and more.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> HPR05005)](/parts/HPR05005) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.