Ryco Filters · Part number Z219 · NZ$173.00 incl. GST
Keep your Holden Commodore, Opel Astra, or Daewoo Nubira purring like a kitten with a fresh oil filter! The RYCO oil filter will keep the abrasive particles out, prevent premature wear, and keep that oil pressure right where it should be.
NZ$173.00 including GST. Part number Z219.
Oil Filter Change: Keep Your Engine Sweet as a Nut!
> Oil filters are the unsung heroes, trapping all the nasty bits floating around in your engine oil. Especially important for vehicles like Holden Commodores and Opel Astras, which can handle the daily grind, but need to be looked after. A new oil filter keeps things running smoothly for years to come.
Symptoms That Led You Here
• Low oil pressure? Uh oh!
• Engine knocking or ticking? Not good, mate.
• Oil looking like mud? Time for a change!
• Oil light on the dash? Don't ignore it!
• Feeling a bit sluggish? Could be the filter.
Will it pass WOF?
Yep, as long as your old filter isn't leaking oil all over the show. They don't check the filter itself during a WOF, but they will pick up on any leaks.
DIY or Workshop?
Difficulty: 4/10
Estimated Time: 30 minutes
Tools Required: Oil filter wrench, socket set, drain pan, fresh oil, gloves, and rags. Plus a bit of elbow grease!
Expert Recommendation
Changing your oil and filter regularly is the best thing you can do to keep your engine happy and healthy. A quality oil filter like this RYCO one (SKU Z219) will do the trick. CARFIX has a huge range of oil filters to suit every budget. Give Bob a yell at CARFIX, and he'll sort you out with the right bits for your Holden or Opel. Pop into Bob's Shop for a yarn!
🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First, Always! Never get under a car supported only by a jack. Use proper axle stands – your life's worth it! And disconnect the battery, just to be safe.
• Cleanliness is Key: Before you even crack a bolt, give the area around the oil filter a good scrub with a Brake Cleaner. A clean workspace prevents muck from getting into your engine.
• Protection Matters: Wear Nitrile Gloves to keep your hands clean and protected from oil and chemicals. Safety glasses are a must to keep stray oil splashes out of your eyes.
• Lubrication Lowdown: A smear of fresh oil on the new filter's rubber seal ensures a good, tight fit. Trust me, it's a no-brainer.
Fitment Notes
Double-check that this filter fits your specific vehicle before you start. Make sure you tighten it properly to avoid any leaks. Some models might need a special oil filter wrench to get the old one off.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> HPRD15010)](/parts/HPRD15010) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.