
Ryco Filters · Part number Z136 · NZ$65.00 incl. GST
Right then, for a huge range of vehicles, from your trusty daily drive to the workhorse ute, a fresh Oil Filter is absolutely mint for keeping your engine humming by grabbing all those nasty bits out of your oil. The RYCO Z136 is a top-notch choice, known for its super-efficient performance and built-to-last durability, and yep, CARFIX has it.
NZ$65.00 including GST. Part number Z136.
Oil Filter Swap — Bob's Top Tips with RYCO!
> An oil filter is like your engine's bouncer, keeping out the riff-raff — things like dirt, tiny metal bits, and sludge — from your precious engine oil. Over time, these filters get choked up, meaning they can't do their job properly. And that, my friend, can lead to your engine wearing out faster than a pair of jandals on a hot beach, especially if you're putting your vehicle through its paces or using it for those tough commercial gigs.
What's Your Engine Telling You?
• Feeling a bit sluggish, like it's had too many pies?
• That pesky engine warning light flashing (often an oil pressure grumble)?
• Hearing some funny noises — a tap, tap, tap or a knock, knock, knock?
• Oil looking like a dark, sludgy mess, even after a recent change?
• Guzzling fuel like there's no tomorrow?
WOF Check?
Now, a clogged oil filter won't directly fail your WOF, but trust me, an engine that's not looked after because of a dodgy filter can cause all sorts of WOF dramas. Think excessive exhaust fumes or even engine damage. So, keep up with those regular oil and filter changes — it's not just good for your WOF, it's good for your wallet and your engine's ticker!
DIY or Call in the Pros?
Difficulty: 4/10 (for most common vehicles)
Estimated Time: 30-60 minutes
Tools Required: Oil filter wrench, drain pan, socket set (for drain plug), new crush washer, rags, jack and jack stands (or ramps).
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive under the bonnet, a quick word from Bob. Safety first, always! You wouldn't want a spanner in the works, literally. Here's what you'll need to make this job a breeze:
• Engine Flush Additive: Give your engine a good clean out before draining the old oil. It helps loosen up all that gunk.
• Oil Filter Wrench: Essential for getting that old filter off without a fuss.
• Oil Drip Tray: Keep your driveway spick and span! No one wants an oil slick.
• Workshop Rags: For mopping up any spills and keeping things tidy.
• Heavy-Duty Hand Cleaner: Your hands will thank you after this job!
• Safety Glasses & Gloves: Protect those eyes and hands, mate. It's not worth the risk.
Ready to grab these bits? We've got you sorted at CARFIX!
Expert Recommendation
Bob @ CARFIX reckons that regular oil and filter changes are the absolute golden ticket to a long and happy engine life. A quality oil filter, like the RYCO Z136, is like a guardian angel for your engine, keeping out all those nasty particles. Bob @ CARFIX is always keen for a yarn to help you figure out exactly what your ride needs. Pop on over to Bob's Shop — the kettle's always on!
Fitment Notes
This RYCO Z136 oil filter is designed to be pretty versatile, fitting a broad range of vehicles. But listen up, it's super important to double-check against your specific vehicle's make, model, and engine type. Even "universal" parts can have their quirks, so let's make sure it's a perfect match!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these oil filter, don't skimp on proper workshop preparation and safety products. Doing the job right the first time protects your investment, saves massive workshop labor fees, and guarantees a quiet, smooth ride!
🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.