
Ryco Filters · Part number Z1217 · NZ$80.00 incl. GST
For your rugged Great Wall Tank 300, whether petrol or hybrid, the RYCO Z1217 oil filter is your engine's best mate, trapping all those nasty contaminants and metal bits before they can munch on your engine's insides. We stock this premium Aussie-engineered gem.
NZ$80.00 including GST. Part number Z1217.
Keep Your Tank 300's Heart Ticking: The Ultimate Oil Filter Lowdown
> Right, let's talk brass tacks about oil filters. These little legends are the unsung heroes, stopping all the abrasive gunk, combustion crud, and metal filings from tearing through your engine's guts. And for a serious off-road beast like your Great Wall Tank 300 — built for gnarly Kiwi trails, river crossings, and dusty high-country adventures — a top-notch filter isn't just a good idea, it's a non-negotiable. Skimp here, and you're looking at accelerated wear on your bearings, scarred cylinders, and potentially a very sad turbo. Don't be that guy!
Symptoms That Led You Here
• Oil pressure warning light flickering or illuminated
• Engine running louder than usual, particularly at startup
• Dark, gritty oil on the dipstick well before service interval
• Reduced fuel economy without obvious cause
• Metallic shimmer visible in drained oil
Will it pass WOF?
Oil filters aren't directly inspected during a NZ Warrant of Fitness, but the consequences of neglect are. Excessive smoke from oil burning past worn rings, visible leaks from filter housing failure, or engine noise from inadequate lubrication can all trigger WOF failure. Preventative replacement keeps your Tank 300 compliant and reliable.
DIY or Workshop?
Difficulty: 3/10 | Time: 20-30 minutes | Tools: Oil filter wrench, drain pan, 14mm socket, new crush washer
The Tank 300's accessible underbody design makes filter changes straightforward for confident DIYers. Ensure the engine is warm but not hot, use a quality filter wrench to avoid crushing the canister, and always replace the sump plug washer to prevent slow leaks.
Expert Recommendation
Bob @ CARFIX recommends replacing your oil filter at every oil change—typically every 10,000-15,000km or annually, whichever comes first. For vehicles tackling dusty Central Otago tracks or muddy Northland forestry roads, consider halving that interval. The RYCO Z1217 is engineered in Australia specifically for harsh conditions, featuring high-capacity filtration media and robust anti-drainback valves. Bob @ CARFIX is always on hand to help you work out exactly what filter suits your Tank 300's driving conditions. Make sure you head over to Bob's Shop for a chat!
Fitment Notes
• Confirmed fitment for Great Wall Tank 300 petrol models (2023+)
• Confirmed fitment for Great Wall Tank 300 Hybrid/HEV variants (2022-2024+)
• Always verify engine code matches—Tank 300 variants may use different filter housings depending on powertrain
• Hybrid models: ensure you're replacing the combustion engine filter, not confusing with any auxiliary filtration systems
---
🛠️ Bob's Pro Tip: Do the Job Right!
🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.