
Ryco Filters · Part number Z1202 · NZ$49.00 incl. GST
Keen to keep your Alfa Romeo Giulietta TBi or 4C purring like a kitten? Oil filters are the unsung heroes.
NZ$49.00 including GST. Part number Z1202.
Oil Filter Change: Keep Your Alfa Romeo Sweet as!
> Oil filters are like the bouncers at an exclusive club for your engine oil, keeping out the riff-raff that causes wear and tear. Especially in a sporty number like the Alfa Romeo Giulietta TBi or 4C, a clean oil supply is the key to keeping things humming, especially when you're giving it a bit of stick.
Spotting the Warning Signs:
• Engine's lost its mojo?
• Sounds a bit rough around the edges?
• That pesky oil light's glaring at you?
• Your oil looks like it's been down a coal mine?
• You can see bits floating in the oil?
Will it pass WOF?
Too right, mate! A good oil filter is essential for a happy engine and keeping emissions in check, both big ticks for your WOF.
DIY or Hand it to the Pros?
Difficulty: 4/10
Estimated Time: 30-60 minutes
Gear You'll Need: Oil filter wrench, socket set, drain pan, jack and stands (optional, but safer!), fresh oil, gloves to keep those hands clean, and a few rags.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, a quick yarn about keeping things safe and tidy. Firstly, never get under a car that's only held up by a jack – axle stands are your best mate here. Grab some Nitrile Gloves to dodge the oily mess, and have a bottle of Engine Flush handy to give your engine a good internal scrub before you drain the old oil. Last but not least, don't forget an Oil Drip Tray to catch the old oil – we want to keep the workshop (or driveway) sparkling, eh?
Bob's Two Cents
Regular oil and filter changes are a no-brainer for keeping your Alfa Romeo ticking like a Swiss watch. Come on down to Bob's Shop, and we'll sort you out with the perfect fit for your Alfa. I'm always here to yarn about cars and get you sorted!
Fitment Notes
Double-check you've got the right oil filter for your specific Alfa Romeo model and engine. And always peek at the service manual for the official install instructions and torque settings.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> EPLUS5W40005)](/parts/EPLUS5W40005) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Clean Workspace: Lay down an oil drip tray and microfibre towels under the oil drain plug.
• Gasket Inspection: Double check that the old oil filter's rubber O-ring came off with the filter, and pre-lube the new filter gasket with fresh oil before mounting.
• Clean Hands: Protect your hands from used engine oil with Nitrile Gloves.