Bosch · Part number WR3CC · NZ$9.00 incl. GST
Keep your classic Porsche 911 or Alfa Romeo Giulietta purring like a kitten with fresh spark plugs!
NZ$9.00 including GST. Part number WR3CC.
Spark Plug Change-Out Guide — Starring BOSCH
> Spark plugs, eh? Little blighters are key to getting that perfect bang in your Porsche 911 or Alfa Romeo Giulietta's cylinders. Over time, they get a real hiding from the heat and electricity, which means your engine might not be running as sweet as it should, and you'll be burning more gas than you need to.
What Clued You In?
• Engine's misfiring, especially when you put your foot down
• Idling rough as guts or stalling
• Fuel economy's gone down the gurgler
• Hard to get the engine started
• That pesky check engine light's on
WOF Woes?
Dodgy spark plugs can mess with your emissions, and that could mean a WOF failure. No good, mate.
DIY or Get a Pro?
Difficulty: 6/10
Estimated Time: 1-2 hours
Tools You'll Need: Spark plug socket, ratchet, torque wrench, spark plug gap tool
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get your hands dirty, a quick yarn about doing it right. Safety first, always! And a clean job's a good job, eh?
• Safety Glasses: Protect your peepers from any flying grit. Safety Glasses
• Nitrile Gloves: Keep your mitts clean and away from the muck. Nitrile Gloves
• Spark Plug Socket: A proper spark plug socket will grip the plug properly without damaging it.
• Dielectric Grease: A dab of dielectric grease on the spark plug insulator will help keep moisture out and prevent corrosion.
Expert's Two Cents
Swapping out your spark plugs is a no-brainer for keeping your classic Porsche or Alfa Romeo running like a dream. Bob at CARFIX is always keen to help you find the exact part you need for your classic sports car. Pop into Bob's Shop for a yarn!
Fitment Notes
Make sure that spark plug gap is spot-on for your engine model. Check your service manual for the right specs, eh.
Bob's tip: A tiny dab of grease on the threads helps next time!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.