NGK Spark Plugs · Part number UR6IX · NZ$61.00 incl. GST
Needing some new spark plugs for your old-school Ford Falcon, trusty F-150, or even a Bedford CF van?
NZ$61.00 including GST. Part number UR6IX.
Spark Plug Change-Out: Get Your Ford Humming Again!
> Spark plugs in your Ford Falcon or F-150 are like the baristas of your engine, brewing up that essential combustion. Over time, heat and gunk build up, leading to misfires and a rough ride, especially in older models. Don't get caught out on the open road!
Spotting the Signs of Dodgy Spark Plugs
• Your Ford Falcon GT is misfiring, especially when you put your foot down.
• Rough as guts idling in your Bedford CF van.
• Your Ford F-150 is suddenly thirstier than a rugby team after a match.
• Hard to start, especially on those frosty mornings.
• That pesky engine light is glaring at you.
Will it pass WOF?
Dodgy spark plugs mean excessive emissions, and that's a surefire way to fail your WOF. Get it sorted before you get stung!
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours
Tools Required: Spark plug socket, ratchet, torque wrench, spark plug gap tool, anti-seize compound.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, grab these essentials to make the job smooth and safe:
• Safety First: Chuck on some Safety Glasses to keep the grit out of your eyes.
• Glove Up: Nitrile Gloves will keep your hands clean and protected from any nasty chemicals.
• Keep it Clean: A can of Brake Cleaner is perfect for blasting away any carbon buildup around the spark plug holes. Give everything a good once-over before you start.
• Smooth Operator: A dab of anti-seize compound on the new spark plug threads will make life easier next time around.
Expert Recommendation
Swapping out your spark plugs is a no-brainer for keeping your Ford Falcon or F-150 running sweet as. Call into Bob's Shop and we'll get you sorted!
Fitment Notes
Double-check you've got the right spark plugs for your specific engine. Ford Falcons and F-150s can be a bit fussy depending on the year and engine. Always gap those new plugs to the manufacturer's specs before you screw them in.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.