Tridon · Part number TTH019 · NZ$419.00 incl. GST
Right then, a Throttle Position Sensor (TPS) is that clever bit of kit that tells your engine's computer exactly how much 'go' you're asking for, making sure your fuel delivery and engine performance are spot on. This TRIDON number is a solid choice from our shed, among other top brands.
NZ$419.00 including GST. Part number TTH019.
Throttle Position Sensor (TPS) TLC Guide — Featuring TRIDON's Top-Notch Gear
> G'day! So, your Throttle Position Sensor (TPS) is like the interpreter between your foot and your engine. It's a smart little potentiometer tucked into the throttle body, constantly whispering the throttle valve's angle to your engine's ECU. This vital info helps the ECU dial in the perfect fuel injection and ignition timing, keeping your ride smooth and your engine humming efficiently. But, like anything, a bit of wear and tear can creep in, leading to some dodgy readings and a grumpy engine.
What's Your Engine Grumbling About?
• Feeling a bit 'on again, off again' with the acceleration?
• Is your idle rougher than a dusty corrugated road?
• That pesky Check Engine Light (CEL) flashing up TPS fault codes?
• Drinking more petrol than usual?
• Automatic gearbox feeling a bit clunky?
WOF Worry? Absolutely!
A dodgy Throttle Position Sensor isn't just a nuisance; it's a guaranteed WOF failure. That Check Engine Light will be glowing, and your engine's performance will be off-kilter. Getting this sorted is key for both safety and sailing through that annual WOF check.
DIY or Workshop? Let's Get Stuck In!
Difficulty: 4/10 (Easier than convincing the kids to clean their rooms)
Estimated Time: 30 minutes - 1 hour (Plenty of time for a cuppa afterwards)
Tools Required: Your trusty basic hand tools (screwdriver, wrench/socket set), and maybe a multimeter if you're keen on testing.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive into swapping out that TPS, Bob always reckons it's best to be prepared. Grab these bits to make the job smoother and safer:
• Safety First! Always have your Safety Glasses on; you never know what might flick up.
• Good quality Nitrile Gloves keep your hands clean and protected from grease and grime.
• A can of Rust Penetrant can be a lifesaver for those stubborn, seized bolts.
• Have some Workshop Rags handy for any spills or to wipe down surfaces.
Expert Recommendation from Bob
Bob @ CARFIX is a firm believer that replacing a faulty Throttle Position Sensor is a no-brainer for getting your engine back in tip-top shape and avoiding bigger headaches down the track. The TRIDON A6115039 is a cracker of a choice, built to OE specs, so you know it'll perform reliably. We've also got a solid range of other quality brands to fit every budget. And remember, Bob @ CARFIX is always here for a yarn and to help you figure out exactly what your vehicle needs. Pop into Bob's Shop for a chat anytime!
Fitment Notes
This Throttle Position Sensor is designed for a good range of vehicles. But hey, always double-check! Cross-reference the part number with what's already in your vehicle or peek at your service manual to confirm it's the right fit before you buy. Better safe than sorry, eh?
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this throttle position sensor / switch, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.