CARFIX

Tridon Constant Tension Clamp 14-27mm Stainless Steel Perforated Band

Tridon · Part number TGP131 · NZ$122.00 incl. GST

Got a Hyundai Accent CRDi or Kia Carens CRDi playing up? A new Crankshaft Position Sensor, like this reliable TRIDON unit, feeds your engine's brain (ECU) the vital info it needs for sweet fuel delivery and a smooth ride.

Price

NZ$122.00 including GST. Part number TGP131.

Fits these vehicles

Description

Crankshaft Position Sensor Replacement Guide — TRIDON to the Rescue!
> That Crankshaft Position Sensor (CKP) is a crucial bit of kit in your modern diesel, like the ones humming away in Hyundai Accent CRDi and Kia Carens CRDi models. It's the crankshaft's tattletale, reporting its speed and position back to the Engine Control Unit (ECU) so it can time fuel injection just right. Over time, all that heat and those tough conditions under the bonnet can take their toll, leading to dodgy readings and engine trouble. Time for a new one, mate!
Symptoms That Led You Here
• Engine cranks, but refuses to fire up
• Stalling out of the blue, especially when it's warmed up
• Idling rough as guts or misfires
• Fuel economy down the drain
• Check Engine Light (CEL) glaring at you with crankshaft fault codes
• Feels like you're losing power or the engine hesitates when you put your foot down
Will it pass WOF?
She'll be right...NOT! A crook Crankshaft Position Sensor will almost certainly light up that Check Engine Light (CEL), which is a guaranteed WOF failure here in New Zealand. Plus, those engine performance issues could mean you're pumping out too many emissions or driving in an unsafe state. No WOF for you, mate!
DIY or Workshop?
Difficulty: 6/10 (Moderate)
Estimated Time: 1-3 hours
Tools Required: Socket set, ratchet, extension (maybe a universal joint), multimeter for testing, a diagnostic scan tool to confirm the fault and clear those codes, and your usual hand tools. Getting to the sensor can be a bit of a mission depending on your model, so be prepared to get your hands dirty.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, grab these essentials to keep things safe and smooth:
• Safety First: Chuck on some Safety Glasses to protect your peepers from any flying grit or splashes.
• Glove Up: Keep those hands clean and protected with a pair of Nitrile Gloves. No one likes greasy mitts!
• It'll make your life a whole lot easier.
• Cleanliness is Key: Once the old sensor is out, give the area a good clean with a Brake Cleaner to remove any gunk or grime. A clean surface ensures a good connection for the new sensor.
• Lube it Up: Apply a dab of anti-seize grease to the sensor's mounting points to prevent corrosion and make future removal a breeze.
Expert Recommendation
Bob @ CARFIX reckons you should get that dodgy Crankshaft Position Sensor sorted pronto to keep your engine purring like a kitten and avoid any further damage. A top-quality sensor makes sure your engine timing is spot-on, which is gold for keeping your diesel running efficiently for years to come. Bob @ CARFIX is always here to help you figure out exactly what you need for your Hyundai or Kia. Pop into Bob's Shop for a yarn!
Fitment Notes
This Crankshaft Position Sensor is designed to fit a range of Hyundai Accent CRDi and i40 CRDi models from 2010-2019, as well as Kia Carens/Rondo CRDi models from 2013-2016. Always double-check your vehicle's year, make, model, and engine code to be absolutely sure it's the right fit. Variations can happen, even within the same model range.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this sensor, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.