Tridon · Part number TGP095 · NZ$133.00 incl. GST
For all you diesel drivers out there, glow plugs are the unsung heroes that get your engine fired up reliably on those chilly mornings, and this TRIDON option.
NZ$133.00 including GST. Part number TGP095.
Glow Plugs: Your Diesel's Best Mate for a Quick Start — Featuring TRIDON
> Ever wondered what gets your diesel purring on a frosty Kiwi morning? It's the glow plugs! These little champions pre-heat the combustion chamber, making sure that fuel ignites properly. When they start to conk out, you'll know it — especially when the mercury drops.
What's Going On Under the Bonnet?
• Engine's having a bit of a mare getting started, particularly when it's cold outside.
• Rough idle or a bit of a cough and splutter right after you fire it up.
• A bit more smoke than usual coming out the back end when you start the engine.
• The 'check engine' light might even pop on, though that's less common for just glow plugs.
Will it pass WOF?
While a dodgy glow plug might not directly fail your WOF, those starting issues or a smoky exhaust could definitely lead to a conditional pass or even a fail if they point to bigger engine troubles or emissions worries. Keeping your glow plugs tip-top is just good sense for your vehicle's overall health and performance. Better safe than sorry, eh?
DIY or Workshop?
Difficulty: 6/10 – A bit more than a quick oil change, but totally doable for the keen DIYer.
Estimated Time: 1-3 hours (depends on how easy it is to get at 'em on your engine, some are a real squeeze!)
Tools Required: Socket set (you'll likely need some deep ones), a torque wrench (don't skimp on this, mate!), a glow plug removal tool (sometimes these are a bit special), anti-seize compound, and a multimeter for testing.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive into swapping out those glow plugs, let's make sure you've got everything you need for a smooth, safe job. Bob always says, "A good plan makes for a good job!":
• Safety First! Grab some safety glasses to protect your peepers and some heavy-duty nitrile gloves to keep your hands clean and protected from grime and fuel.
• Cleanliness is Key! Have some workshop rags handy for any spills or to wipe down parts.
• Smooth Operator: A bit of rust penetrant can be a lifesaver for freeing up any stubborn, seized-up glow plugs. And don't forget the anti-seize compound for the new ones to make future removal a breeze!
Expert Recommendation
Bob here at CARFIX always reckons it's a no-brainer to replace all your glow plugs at once. It keeps your engine running sweet and prevents you from having to do the job again in a few months when another one carks it. This TRIDON A1305923 glow plug is a top-notch choice, built to OE specs for reliable performance. Pop into Bob's Shop for a yarn if you're not sure — I'm always happy to help you find exactly what you need!
Fitment Notes
This glow plug is generally designed to fit a good range of vehicles. But hey, don't just take our word for it — always double-check the part number against your vehicle's specific requirements or flick through your owner's manual to be absolutely certain it's the right fit. No one wants to be caught out with the wrong part!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this glow plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.