ASL · Part number SL6340L · NZ$64.00 incl. GST
Got a Honda Fit or Jazz doing the twist? Sway bar links are the unsung heroes keeping those nippy little cars stable through the corners. They hook the sway bar to your suspension, taming body roll.
NZ$64.00 including GST. Part number SL6340L.
Sort Out That Body Roll: Sway Bar Link Guide — Starring ASL
> Those sway bar links are vital bits in your Honda Fit or Jazz's suspension, yanking the sway bar to the wheel hubs. They stop you feeling like you're on a boat when you take a corner, especially important because these cars are great in the twisty bits. Give them enough stick and they will fail, leading to sloppy handling and maybe even a WOF failure.
Symptoms That Led You Here
• Hear a clunking or rattling from down below, especially over bumps?
• Feels like the car's wandering around when you corner?
• Can you see damage or movement in the sway bar links?
• Handling's gone a bit vague?
Will it pass WOF?
Worn sway bar links? That's a recipe for a WOF failure, mate. Get them sorted before the test.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours
Tools Required: Jack and stands, socket set, wrench set, penetrating oil.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, a quick yarn about doing it safe and smart. Grab some Brake Cleaner to blast away any muck and corrosion - gives you a clean surface to work on. Don't forget your safety glasses and Nitrile Gloves – nobody wants grit in their eyes or grease under their fingernails! And for goodness sake, never get under a car supported only by a jack! Use proper stands!
Expert Recommendation
Worn sway bar links can make your Honda feel like it's had one too many cafe lunches. Replacing them sharpens things up and keeps you safe. Bob @ CARFIX is always here to help you choose the right part for your Honda Fit or Jazz. Pop into Bob's Shop for a yarn!
Fitment Notes
Double-check those new links are the right fit for your Honda's year and model. Some have left and right-specific parts, so watch out for that.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this sway bar link, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.