ASL · Part number SL2800 · NZ$11.00 incl. GST
Gotta keep that old Toyota Corolla or Sprinter cornering like it should! Sway bar links join the sway bar to your suspension, stopping that body roll.
NZ$11.00 including GST. Part number SL2800.
Get Your Toyota Corolla Handling Like New With a Sway Bar Link Replacement
> Sway bar links are the unsung heroes that hook your sway (or anti-roll) bar up to the suspension. They wear out over time, especially on older rigs like the Toyota Corolla and Sprinter. When they go, your handling goes with them.
Spotting the Dodgy Sway Bar Link – Signs You Need to Act
• Hear a clunking or rattling when you hit those bumps? That's a prime suspect.
• Is your handling gone all soft, with way too much body roll on the corners?
• Can you see the damage? Cracks, bends, or just plain worn-out rubber.
• Steering feelin' a bit vague and wobbly?
WOF Woes? Get It Sorted!
Dodgy sway bar links are a quick way to fail a WOF here in NZ. Get 'em sorted to keep things legal.
DIY or Hand It Over to the Pros?
Difficulty: 6/10
Estimated Time: 1-2 hours
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking on those sway bar links, grab these essentials to make the job smooth and safe, eh?
• Safety First, Mates! Never, ever get under a car that's only held up by a jack. Use proper Jack Stands. Seriously, it's a no-brainer.
• Makes life a whole lot easier.
• Eye Protection: Keep the crud out of your eyes with some Safety Glasses. You'll thank me later.
• Glove Up: Keep your mitts clean with some Nitrile Gloves. No one likes greasy hands!
Expert Recommendation
Worn sway bar links will turn your usually dependable Toyota Corolla or Sprinter into a bit of a handful. Swapping them sorts the stability and saves other suspension bits from taking a hiding. I'm always here to figure out exactly what works for your Toyota. Pop over to Bob's Shop for a yarn!
Fitment Notes
Double-check the sway bar link matches your exact model and year. Some might have different lengths or mounts.
Bob's got your back!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this sway bar link, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.