RDA Brakes · Part number RDX2240SM · NZ$143.00 incl. GST
Need new brake pads for your trusty KIA Cerato or Hyundai i30? These RDA ones are a top pick to keep you safe on the road, giving you reliable stopping power whether you're cruising the motorway or stuck in city traffic.
NZ$143.00 including GST. Part number RDX2240SM.
Brake Pad Replacement: Get Your KIA Cerato or Hyundai i30 Sorted with RDA
> Brake pads are what slow you down, turning the energy of your moving car into heat by squeezing against the rotors. For popular Kiwi cars like the KIA Cerato and Hyundai i30, checking and swapping out those pads regularly is a no-brainer for keeping things safe, whether you're navigating rush hour or enjoying the open road.
Spotting the Signs: Is It Time for New Pads?
• Hear a nasty squeal or grind when you hit the brakes?
• Taking longer to stop, or the pedal feels soft?
• Feeling a wobble in the steering wheel or brake pedal when braking?
• Pads look thin (less than 3mm of material left)?
• Dashboard warning light's on (though not always just for worn pads).
WOF Woes? Worn Pads Will Fail You
Yep, if your brake pads are too worn, you'll be gutted when your car fails its WOF. They need enough material to stop you safely. Usually, anything under 1.5mm is a fail, but it's best to get them changed before they get that low.
DIY or Get a Pro?
Difficulty: 5/10 (A decent challenge)
Time Needed: An hour or two per axle
Gear You'll Need: Jack, axle stands, wheel brace, G-clamp or piston tool, spanner set, brake cleaner, torque wrench, safety glasses, gloves.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get stuck in, a few friendly reminders from Bob. First up, safety! Never, ever get under a car that's only held up by a jack. Use proper axle stands, yeah? Grab some safety glasses to keep the brake dust out of your eyes and nitrile gloves to keep your hands clean from brake dust – that stuff's messy! Now, give those rotors a good blast with Brake Cleaner to get rid of any gunk. And last but not least, a little dab of anti-seize grease on the caliper bolts will make life easier next time you're in there. Trust Bob, it's worth it.
Bob's Two Cents
I always say, don't muck around with brakes. Get those pads replaced at the first sign of wear to keep your stopping power spot-on. Letting them go too long can wreck your rotors, and that'll cost you more in the long run. The RDA RDX2240SM pads are a solid, reliable choice for everyday driving. Come on down to Bob's Shop, and we'll sort you out with the right parts for your KIA Cerato or Hyundai i30. Keen as to see you!
Fitment Notes
These pads are made to fit a bunch of popular models, like the KIA Cerato MPi (2016-2018), KIA Cerato CVVT (2016-2999), HYUNDAI i30 CRDi (2012-2999), and HYUNDAI ELANTRA (2010-2016). Always double-check your car's year, model, and engine to be sure, as brake setups can be different even within the same model range.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> DF7301S)](/parts/DF7301S) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.