CARFIX

RDA GP Max General Purpose Low Metallic Brake Pad Set

RDA Brakes · Part number RDC2565 · NZ$96.00 incl. GST

RDA GP Max General Purpose Low Metallic Brake Pad Set by RDA Brakes, part number RDC2565.

Price

NZ$96.00 including GST. Part number RDC2565.

Fits these vehicles

Description

Brake Pad Replacement Guide — Featuring RDA for Toyota 4x4s
> Brake pads are a consumable part, like your cafe lunch on a long roadie – they wear out! These bits of friction material are what slows your beast down. On tough 4x4s like the Hilux and Land Cruiser, they get a real workout with all the towing, off-roading, and steep hills we throw at them. So, keeping them in good nick is a no-brainer.

Symptoms That Led You Here
• Squealing, grinding, or metallic noises when braking – sounds like you're gutting a fish!
• Increased stopping distances or a 'spongy' brake pedal – scary stuff.
• Vibrations felt through the steering wheel or brake pedal when stopping.
• Visible wear on the brake pads (less than 3mm of friction stuff remaining).
• Brake warning light is glaring at you from the dashboard.

Will it pass WOF?
Nope. Worn brake pads are a big no-no for your Warrant of Fitness (WOF) check in New Zealand. They're a safety hazard, plain and simple. You need decent pad thickness and good stopping power to pass the test.

DIY or Workshop?
Difficulty: 6/10 (Moderate)
Estimated Time: 1-2 hours per axle
Tools Required: Jack, jack stands, wheel nut wrench, C-clamp or brake caliper piston compressor, spanner/socket set, brake cleaner, torque wrench, and potentially a wire brush.

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking on those brakes, mate, a bit of prep goes a long way. Safety first, always! Never get under a car supported *only* by a jack – use proper jack stands. Grab some Nitrile Gloves – brake dust is minging. And don't forget Brake Cleaner to blast away that brake dust before you start pulling things apart. A can of anti-seize caliper grease is also your friend – a tiny dab prevents squeals and keeps things moving smoothly. Safety glasses are a must, too, to keep the crud out of your eyes.

Expert Recommendation
Bob at CARFIX reckons you should change your brake pads the moment you see wear or feel a difference. Don't wait till it's metal-on-metal! The RDA RDC2565 pads are a top pick for Hilux, 4Runner, and Land Cruiser owners who demand reliable stopping power. Bob @ CARFIX is always here to help you find the exact part you need for your Toyota 4x4. Pop over to Bob's Shop for a yarn!

Fitment Notes
These brake pads are made for Toyota 4Runner, Hilux Surf, Hilux, and Land Cruiser models from '84 to '05. Double-check your exact year, model, and sub-model against the list to make sure they fit, especially with all the variations in these 4x4s.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> DF1418S)](/parts/DF1418S) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.