RDA Brakes · Part number RDC2081 · NZ$122.00 incl. GST
Need new brake pads for your Chrysler 300C? No worries, CARFIX has you sorted! RDA brake pads are a solid choice, but we also stock alternatives.
NZ$122.00 including GST. Part number RDC2081.
Chrysler 300C Brake Pad Replacement — The RDA Way
> Your Chrysler 300C's brake pads are what turn all that kinetic energy into stopping power. They clamp down on the rotors, using friction to slow you down. But over time, they wear out, especially on a heavier beast like the 300C, leaving you with less stopping power.
Uh Oh, Sounds Like You've Got These Symptoms...
• Brakes are squealing like a stuck pig or grinding something shocking?
• Braking feels a bit soft, and you're taking longer to stop?
• That pesky brake pad warning light's lit up on your dash?
• You've had a peek, and the pads are looking thinner than a cafe lunch?
• The brake pedal's vibrating like crazy when you hit the anchors?
WOF Woes?
Worn brake pads are a guaranteed fail at WOF time in New Zealand. They need to be thick enough to pull you up safely. Check the Land Transport NZ guidelines for the exact low-down.
DIY or Hand It Over?
Difficulty: 6/10
Estimated Time: 2-3 hours
Tools Required: Jack and stands, wrench set, socket set, brake cleaner, C-clamp or brake spreader tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First, Mates! Never, ever get under your 300C supported only by a jack. Use proper axle stands – your life depends on it!
• Keep it Clean: Brake dust is nasty stuff. Give everything a good blast with Brake Cleaner to remove it before you start.
• Glove Up: Protect your hands with some heavy-duty Nitrile Gloves. Brake cleaner and old brake pad material isn't great for your skin.
• Lube It Right: Use a dab of anti-seize Caliper Grease on the brake pad contact points to prevent squealing and ensure smooth movement.
Expert Recommendation
Swapping out those worn pads is a no-brainer for keeping your Chrysler 300C safe and sound. Pop into Bob's Shop for a yarn, and I'll sort you out with the right pads for your 300C.
Fitment Notes
Double-check the pads fit your exact 300C model and year. Some models have different brake setups. Always replace pads in pairs across the axle to keep the braking balanced.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> DBA2444X)](/parts/DBA2444X) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.