CARFIX

RDA Phantom Ceramic Brake Pad Set

RDA Brakes — RDA Phantom Ceramic Brake Pad Set — part number RDC2009

RDA Brakes · Part number RDC2009 · NZ$100.00 incl. GST

For your trusty daily runner like the Toyota Yaris, Corolla, or even the Lexus CT 200h, brake pads are the absolute backbone of safety, providing that crucial grip to slow you down and stop dead in your tracks, and this RDA option is a solid performer.

Price

NZ$100.00 including GST. Part number RDC2009.

Fits these vehicles

Description

Brake Pad Replacement: Your Ticket to Stopping Power!
> Right then, let's talk brake pads! These little legends are your vehicle's unsung heroes, turning all that go-fast energy into heat to bring your car to a safe, controlled stop. For your everyday Kiwi commuters like the Toyota Yaris and Corolla, keeping an eye on your pads and swapping them out when needed isn't just good practice – it's crucial for staying safe on our roads, no matter the conditions.
What's Your Car Trying to Tell Ya?
• Hearing some squeals or grinding when you hit the brakes? That's a red flag!
• Feeling like your pedal's gone a bit soft, or it's taking longer to pull up?
• Got a shimmy or shake through the steering wheel or brake pedal when you're slowing down?
• Noticeably longer stopping distances? Eek!
• Dashboard warning light having a chinwag (if your car's fancy enough to have wear sensors).
Will it pass WOF?
Nah, mate, no chance! Worn brake pads are a big no-no and will get you an instant WOF (Warrant of Fitness) fail here in New Zealand. You need a decent chunk of friction material left (think typically over 1.5mm) to sail through that inspection.
DIY or Workshop?
Difficulty: 5/10 (A bit of a mission, but totally doable)
Estimated Time: 1-2 hours per axle (grab a cuppa halfway through!)
Tools Required: Jack, trusty jack stands (safety first!), wheel nut wrench, C-clamp or a brake caliper piston compressor, the right-sized spanners/sockets, brake cleaner (to blast that carbon dust!), torque wrench, and maybe a wire brush for those stubborn bits.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive into swapping out those brake pads, let's make sure you've got all your ducks in a row for a safe and successful job. You don't want to be caught short!
• Safety Glasses: Keep those peepers protected! Bits of rust and brake dust flying around are no joke. Safety Glasses
• Heavy-Duty Nitrile Gloves: Keep your hands clean and protected from all that grime. Trust us, your hands will thank you! Nitrile Gloves
• Brake Cleaner Spray: This stuff is magic for blasting away brake dust and grime, ensuring a clean surface for your new pads. Essential for optimal performance! Brake Cleaner
• Anti-Seize Caliper Grease: A little dab'll do ya! This helps prevent seizing and keeps things moving smoothly. Anti-Seize Grease
• Workshop Rags: For all those little clean-ups and spills. Never hurts to have a pile handy. Workshop Rags

Expert Recommendation
Bob @ CARFIX always reckons you should swap out those brake pads at the very first whisper of wear or a drop in performance. It's all about keeping you and yours safe and stopping any nasties from damaging other brake bits like your rotors. These RDA RDC2009 pads are a top-notch choice for those Toyota and Lexus models, giving you a great mix of performance and value. But hey, we've got the full spectrum! And remember, Bob @ CARFIX is always here for a yarn and to help you nail down exactly what part you need for your Toyota Yaris or Lexus CT 200h. Pop into Bob's Shop for a chat – the kettle's always on!
Fitment Notes
These brake pads are a great fit for a whole slew of popular Toyota models, including various generations of the Vitz/Yaris and Corolla/Corolla Axio, plus the Lexus CT 200h. Always, always, double-check your specific year and sub-model against our fitment list – it's super important, as even within the same model, things can change!

---

🛠️ Bob's Pro Tip: Do the Job Right!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.